I currently have a windows form that I am using as a "holder" for many panels. All of these panels are being used like pages, so say I have a default panel, a details panel etc. They all cover the exact same area and i am using a top menu to have buttons to show/hide the correct panel.
The problem I have with this is that I cannot select one panel and edit it or simply bring it to the front to edit it in "design" mode, I currently have to keep sending the top panel to the back until I get the one I need. This is okay now, but eventually my program will have over 20 panel type pages, and this will get tedious.
Is there a better way to manage this, or is there an easier way than using panels?
All these panels are used like pages
Above line in your question suggests that you should be using TabPage instead of Panels.
Therefore, You can use a TabControl, and add TabPage to it both at design time as well as at runtime easily, and add controls of your choice to the different TabPage(s).
According to wikipedia:-
Tab is one that allows multiple documents to be contained within a single window, using tabs as a navigational widget for switching between sets of documents. which is essentially what you want to do.
As shown in the picture
You can then use Button to switch b/w different TabPage or show/hide TabPage.
It will not only solve your problem of designing at design time, it will also provide a "clean" user interface. Hope that helps!
Check this:-
http://en.wikipedia.org/wiki/Tab_(GUI)
Use a TabControl instead. It will allow you to switch an active panel also in design time.
If you want to keep the panel method there is a way of working around the problem of one panel becoming an element of another. Drag the panel outside the boundary of the other panel (so that it is no longer an element of the other panel) and then re-position it using the arrow keys on your keyboard (i.e. not by dragging it into position over the other panel using the mouse). It seems like the panel will only become an element of another panel if it is dragged into position over the top of another panel using the mouse.
Related
So I have three panels all stacked on top of each other in the same location in a windows form application.
Each time I add another panel on top it becomes a child of the previous panel. This means each panel cannot be shown independently, ie, to show panel 2 I must first show panel1 (the parent). I'm fairly sure this is what is happening. However I need to be able to call panel2.show(), whilst panel 1 is hidden.
Is there a way to work around this?
This is a WinForms designer issue. You can either try moving the panels around and set the position in the properties or enter code behind and set the parent-child relationships manually.
basically don't just drag and drop panels on top of each other. Try to programmatically code their locations. Look for this kind of code in your Form.Designer.cs this.panel2.Controls.Add(this.panel3); and delete them.
Add all your panels in the form part which is supposed to be at the bottom.
this.Controls.Add(this.panel1);
this.Controls.Add(this.panel2);
this.Controls.Add(this.panel3);
This should be able to put all panels as form children.
I am trying to design a UI in C# . I come from Java background and am familiar with the different layout managers in Java.
So what I am trying to do is:
I have a Pane. To this pane I wish to add controls one below the other. In Java I would have used a BoxLayout (Y-Axis), and then just added the controls. Also the individual controls/containers could have been further customized by using different layouts for each individual container.
How do I do this in C#?
What I need to do is:
1)Add controls one below the other. Each individual control can be a collection of smaller controls.
So what I can have is something like:
Control 1 here
Control 2 here
Control 3 here
Each control can have its own layout, say BoxLayout on X axis and so on. How do I do all this?
PS: I am using WINFORMS.
I will take a stab that you are building WinForms, and suggest you look at the following controls, which are similar to the Java layout managers;
Panel
FlowLayoutPanel
TableLayoutPanel
A Panel will let you place controls arbitrarily within it, and you use the Dock, Anchor and Location properties to position each child control.
A FlowLayoutPanel will do what you are asking if you set the flow to 'TopDown', but everything will be left-aligned and that can't be changed I believe.
A TableLayoutPanel is going to be the most useful to you I expect. Just create the panel with 1 column, and add each control to a row. The rows can be set to AutoSize to their contents to give you the closest match to a BoxLayout I think.
I am trying to overlap panels so that whenever I click a button A certain panel will be visible.
However doing this job is very tricky as because the panels doesn't overlap.
for ex. I have panel 1 and panel 2:
I make panel 2 the same as panel 1,
Whenever I position them on the same position...
Sometimes, the panel 2 becomes a member of panel 1 and whenever I set the visibility of panel 1 to true panel 2 also shows up.
What I want is that the two panels to overlap each other.
"Btw, I'm making a vertical tab that's why I thought that hiding, unhiding the panels might be my best approach.
Is it possible to make the panels overlap each other?
The designer is fighting you do get them overlapped. You need to use a little trick to stop the bottom panel from sucking up the overlapping panel. Put it overlapping panel somewhat off towards the upper-left so they are truly overlapped. Then put it in the right spot by adding code to the form constructor:
public Form1() {
InitializeComponent();
panel2.Location = panel1.Location;
panel2.Size = panel1.Size; // optional
}
Another way to do it is with View + Other Windows + Document Layout. You can drag and drop the inner panel to the outer container (form). You will however have to edit the Location property by hand.
It is absolutely possible to have overlapping panels.
The problem you're facing is that the GUI editor treats your panel as containers (that is true) and as long as you place something (including other panel) within a panel it is "nested" in this container.
To avoid this behavior first place one panel and position/size it appropriately. Then right-click on it and choose "Lock controls". That will lock all current form controls and you will be able to put new controls -- including panels -- directly over them, without any fear that something will be nested or somehow placed inside an existing container.
And of course your controls can overlap -- consider only the order or control creation, that will also define the z-order of them in the form -- controls added later and drawn later and thus are positioned on top of those added earlier.
EDIT: Unfortunately I wasn't completely right with my answer. Locking panels does not prevent them from sucking up the controls places entirely within them. But in case of a partial overlap both containers are created on the same level of deepness, so the problem does not exist in case of overlapping panels, as it was asked in the question.
The Panel has a property called Location, which you can modify to fit your needs. As long as you manage to place your Panel so that it is given the correct parent, you can change the position by altering the Location property later. There's really no need to put design code into the constructor or anything such.
And to place the panel in the correct parent, just have the parent selected and double click the Panel control in the toolbar, rather than dragging it into the form manually. There's really no need to try to fight the designer on this one.
I need to create a form with two panels:
1. Destination
2. Source
On the source panel there will be picture boxes. I need to be able to move it from source to point at destination panel with mouse.
I have a problem connected with different coordinates of the panels.
Please, help with advice or an idea what to do.
Moving those controls requires changing their Parent property. That's not easy to do, there is no good time to do this while the user is dragging with the mouse. You'll also get the effect of the panel clipping the control, you cannot display it on both with half of the control on one and the other half on the other panel. And yes, you have to change the Location property of the control when you change the parent or it will jump.
Punt the problem, don't use two panels. It only has to look like a panel, easily done by drawing one in the form's Paint method (or OnPaint override, better). Use e.Graphics.DrawRectangle or FillRectangle.
hii
I am a fresher in the c # so i want to know how to resize the datagrid(any other control)aith respect to the form size.
I just added one datagrid in the form then what i have to do?please help me...from the very basic please
For a dynamic layout that scales with your form size you have various options (depending on the complexity of your layout).
The first ones are
Anchoring
Docking.
But you can also work with advanced container controls like
TableLayoutPanel
FlowLayoutPanel
SplitContainer.
Some more informations i already post in an older question.
If you have more concrete problems about how to solve a specific layout problem you should post a new question with your exact problem.
But at a first tip i can say that it is never necessary to use the Resize event and do some size changes on yourself. There is always a solution that can be solved with the above elements.
You have to ways of dong it:
Using a Dock. It works fine and is very easy to use but its limit is that you can stick it to a one side of parent container. So if you want to streach control only in width you will fail.
Using Anchor. It require more configuration but you can specify all four(top, right, down, bottom option separably.
Regards
Szymon
Go to the properties window and scroll down to "Docking" and choose to dock the control in the parent container. This will give you various options about how you want the control to dock. You should put some containers in there of some sort, maybe, if you've got buttons or things you'd like to have show up above/below/next to the grid. Also, if your grid goes behind your other controls, select the control and bring it to the front.
edit:
You need some containers in which to put your buttons / drop-downs. You could use a flow-layout panel (which wouldn't resize its child controls), or you could use a plain panel or the table-layout panel. The table one will let you dock your child controls within each cell of the table, and you can set your columns & rows to auto-size to a percentage of the entire table width. That way everything will autosize accordingly.