I have a software which needs to remove all of the characters before "|".
For example input
" text needs to removed | Text needs to stay "
An example output will be
"Text needs to stay"
I have the code down below. It works for single-line text but doesn't work on multiple lines. (only removes the text on the first line rest of them stays the same)
I need to make it work with multiple lines. Any ideas?
string input = richTextBox.Text;
string output = input.Substring(input.IndexOf('|') + 1);
richTextBox1.Text = output;
You could do it easily using the Lines property and a temporary List<string> to store the result of substring
List<string> newLines = new List<string>();
foreach (string s in richTextBox1.Lines)
{
// If you want only the lines with the | remove the else block
int x = s.IndexOf('|');
if(x > -1)
newLines.Add(s.Substring(x + 1).Trim());
else
newLines.Add(s);
}
richTextBox1.Lines = newLines.ToArray();
string output = "";
var myArray = input.Split("\r\n");
foreach(var ar in myArray)
if(ar.Length > 0)
output+= ar.Substring(0, ar.IndexOf('|')) + "\r\n";
Oups! i returned the first part, but i suppose you got the point
What about using LINQ for this.
E.g.:
List<string> lines = yourString.Split("\n"); //Add \r if needed
List<string> smallerLines = lines.Select(x => x.Skip(x.IndexOf('|')+1));
If needed you can always create one new string of the output:
string finalString = String.Join(String.Empty, smallerLines);
string input = richTextBox1.Text;
int len = richTextBox1.Lines.Length;
string output = "";
for (int i = 0; i <len; i++)
{
if(i!=len-1)
{
output += richTextBox1.Lines[i].Substring(input.IndexOf('|') + 1) +
Environment.NewLine;
}
else
{
output += richTextBox1.Lines[i].Substring(input.IndexOf('|') + 1);
}
}
richTextBox1.Text = output;
I have a string as follow 51200000000000000000000000000000
This string is not fixed. It will be appended depends on the number of boards. If there are two boards, the string will be as follow 5120000000000000000000000000000052200000000000000000000000000000
I would like to know how to calculate the number of zeros in the string.
I'm using the following code but it is not flexible if there are more than two boards.
string str = "51200000000000000000000000000000";
string zeros = "00000000000000000000000000000";
if (str.Contains(zeros))
{
Console.WriteLine("true");
}
else
{
Console.WriteLine("false");
}
You can use the following piece of code to do this, which will give you the number of zeros(Example).
char matchChar='0';
string strInput = "51200000000000000000000000000000";
int zeroCount = strInput.Count(x => x == matchChar); // will be 29
You can do the same by iterating through each characters and check whether it is the required character(say 0) then take its count.
Use a simple foreach loop to traverse the string and count:
int CountZeroes(string str)
{
// TODO: error checking, etc.
int count = 0;
foreach (var character in str)
{
if (character == '0') count++;
}
return count;
}
a little advanced (or so) technique would be to convert the string to char array then to list of chars then using LINQ
string str = "51200000000000000000000000000000";
List<char> nums = str.ToCharArray().ToList();
Console.WriteLine(nums.Where(x => x.Equals('0')).Select(x => x.ToString()).Count());
i just placed this here in case you want to learn not just a single approach :)
It can also do with a for loop and Substring.
Code
string str = "51200000000000000000000000000000";
int n = 0;
for (int i = 0; i < str.Length; i++)
{
if (str.Substring(i, 1) == "0")
n += 1;
}
Console.WriteLine("Count : " + n.ToString());
Working fiddle demo
Code:
string st;
st = textBox1.Text;
int countch = 0, i;
for (i = 0; i < st.Length; i++)
if (st[i]=='0') countch++;
MessageBox.Show(countch.ToString());
using System.Linq
int count0s = str.Count(z => z == '0');
will return how many 0's in your str string
Please someone to help me to parse these sample string below? I'm having difficulty to split the data and also the data need to add carriage return at the end of every event
sample string:
L,030216,182748,00,FF,I,00,030216,182749,00,FF,I,00,030216,182750,00,FF,I,00
batch of events
expected output:
L,030216,182748,00,FF,I,00 - 1st Event
L,030216,182749,00,FF,I,00 - 2nd Event
L,030216,182750,00,FF,I,00 - 3rd Event
Seems like an easy problem. Something as easy as this should do it:
string line = "L,030216,182748,00,FF,I,00,030216,182749,00,FF,I,00,030216,182750,00,FF,I,00";
string[] array = line.Split(',');
StringBuilder sb = new StringBuilder();
for(int i=0; i<array.Length-1;i+=6)
{
sb.AppendLine(string.Format("{0},{1} - {2} event",array[0],string.Join(",",array.Skip(i+1).Take(6)), "number"));
}
output (sb.ToString()):
L,030216,182748,00,FF,I,00 - number event
L,030216,182749,00,FF,I,00 - number event
L,030216,182750,00,FF,I,00 - number event
All you have to do is work on the function that increments the ordinals (1st, 2nd, etc), but that's easy to get.
This should do the trick, given there are no more L's inside your string, and the comma place is always the sixth starting from the beginning of the batch number.
class Program
{
static void Main(string[] args)
{
String batchOfevents = "L,030216,182748,00,FF,I,00,030216,182749,00,FF,I,00,030216,182750,00,FF,I,00,030216,182751,00,FF,I,00,030216,182752,00,FF,I,00,030216,182753,00,FF,I,00";
// take out the "L," to start processing by finding the index of the correct comma to slice.
batchOfevents = batchOfevents.Substring(2);
String output = "";
int index = 0;
int counter = 0;
while (GetNthIndex(batchOfevents, ',', 6) != -1)
{
counter++;
if (counter == 1){
index = GetNthIndex(batchOfevents, ',', 6);
output += "L, " + batchOfevents.Substring(0, index) + " - 1st event\n";
batchOfevents = batchOfevents.Substring(index + 1);
} else if (counter == 2) {
index = GetNthIndex(batchOfevents, ',', 6);
output += "L, " + batchOfevents.Substring(0, index) + " - 2nd event\n";
batchOfevents = batchOfevents.Substring(index + 1);
}
else if (counter == 3)
{
index = GetNthIndex(batchOfevents, ',', 6);
output += "L, " + batchOfevents.Substring(0, index) + " - 3rd event\n";
batchOfevents = batchOfevents.Substring(index + 1);
} else {
index = GetNthIndex(batchOfevents, ',', 6);
output += "L, " + batchOfevents.Substring(0, index) + " - " + counter + "th event\n";
batchOfevents = batchOfevents.Substring(index + 1);
}
}
output += "L, " + batchOfevents + " - " + (counter+1) + "th event\n";
Console.WriteLine(output);
}
public static int GetNthIndex(string s, char t, int n)
{
int count = 0;
for (int i = 0; i < s.Length; i++)
{
if (s[i] == t)
{
count++;
if (count == n)
{
return i;
}
}
}
return -1;
}
}
Now the output will be in the format you asked for, and the original string has been decomposed.
NOTE: the getNthIndex method was taken from this old post.
If you want to split the string into multiple strings, you need a set of rules,
which are implementable. In your case i would start splitting the complete
string by the given comma , and than go though the elements in a loop.
All the strings in the loop will be appended in a StringBuilder. If your ruleset
say you need a new line, just add it via yourBuilder.Append('\r\n') or use AppendLine.
EDIT
Using this method, you can also easily add new chars like L or at the end rd Event
Look for the start index of 00,FF,I,00 in the entire string.
Extract a sub string starting at 0 and index plus 10 which is the length of the characters in 1.
Loop through it again each time with a new start index where you left of in 2.
Add a new line character each time.
Have a try the following:
string stream = "L,030216,182748,00,FF,I,00, 030216,182749,00,FF,I,00, 030216,182750,00,FF,I,00";
string[] lines = SplitLines(stream, "L", "I", ",");
Here the SplitLines function is implemented to detect variable-length events within the arbitrary-formatted stream:
string stream = "A;030216;182748 ;00;FF;AA;01; 030216;182749;AA;02";
string[] lines = SplitLines(batch, "A", "AA", ";");
Split-rules are:
- all elements of input stream are separated by separator(, for example).
- each event is bounded by the special markers(L and I for example)
- end marker is previous element of event-sequence
static string[] SplitLines(string stream, string startSeq, string endLine, string separator) {
string[] elements = stream.Split(new string[] { separator }, StringSplitOptions.RemoveEmptyEntries);
int pos = 0;
List<string> line = new List<string>();
List<string> lines = new List<string>();
State state = State.SeqStart;
while(pos < elements.Length) {
string current = elements[pos].Trim();
switch(state) {
case State.SeqStart:
if(current == startSeq)
state = State.LineStart;
continue;
case State.LineStart:
if(++pos < elements.Length) {
line.Add(startSeq);
state = State.Line;
}
continue;
case State.Line:
if(current == endLine)
state = State.LineEnd;
else
line.Add(current);
pos++;
continue;
case State.LineEnd:
line.Add(endLine);
line.Add(current);
lines.Add(string.Join(separator, line));
line.Clear();
state = State.LineStart;
continue;
}
}
return lines.ToArray();
}
enum State { SeqStart, LineStart, Line, LineEnd };
f you want to split the string into multiple strings, you need a set of rules, which are implementable. In your case i would start splitting the complete string by the given comma , and than go though the elements in a loop. All the strings in the loop will be appended in a StringBuilder. If your ruleset say you need a new line, just add it via yourBuilder.Append('\r\n') or use AppendLine.
I have a problem with C#.
I am writing code to search a text file until it finds a certain word, then the code should move three lines and read the fourth, then continue the search to find the certain word again.
Now I don't know how to navigate through the file (forward and backward) to the line I want.
Can anybody help?
You can do something like this:
var text = File.ReadAllLines("path"); //read all lines into an array
var foundFirstTime = false;
for (int i = 0; i < text.Length; i++)
{
//Find the word the first time
if(!foundFirstTime && text[i].Contains("word"))
{
//Skip 3 lines - and continue
i = Math.Min(i+3, text.Length-1);
foundFirstTime = true;
}
if(foundFirstTime && text[i].Contains("word"))
{
//Do whatever!
}
}
// read file
List<string> query = (from lines in File.ReadLines(this.Location.FullName, System.Text.Encoding.UTF8)
select lines).ToList<string>();
for (int i = 0; i < query.Count; i++)
{
if (query[i].Contains("TextYouWant"))
{
i = i + 3;
}
}
Your requirements state that you are searching for a specific word. If that is true and you are not instead looking for a specific string, then the checked answer on this is wrong. Instead you should use:
string[] lines = System.IO.File.ReadAllLines("File.txt");
int skip = 3;
string word = "foo";
string pattern = string.Format("\\b{0}\\b", word);
for (int i = 0; i < lines.Count(); i++)
{
var match = System.Text.RegularExpressions.Regex.IsMatch(lines[i], pattern);
System.Diagnostics.Debug.Print(string.Format("Line {0}: {1}", Array.IndexOf(lines, lines[i], i) + 1, match));
if (match) i += skip;
}
If you use the string.contains method and the word you are searching for is "man", while your text somewhere contains "mantle" and "manual", the string.contains method will return as true.
Suppose I have a string with the text: "THIS IS A TEST". How would I split it every n characters? So if n was 10, then it would display:
"THIS IS A "
"TEST"
..you get the idea. The reason is because I want to split a very big line into smaller lines, sort of like word wrap. I think I can use string.Split() for this, but I have no idea how and I'm confused.
Any help would be appreciated.
Let's borrow an implementation from my answer on code review. This inserts a line break every n characters:
public static string SpliceText(string text, int lineLength) {
return Regex.Replace(text, "(.{" + lineLength + "})", "$1" + Environment.NewLine);
}
Edit:
To return an array of strings instead:
public static string[] SpliceText(string text, int lineLength) {
return Regex.Matches(text, ".{1," + lineLength + "}").Cast<Match>().Select(m => m.Value).ToArray();
}
Maybe this can be used to handle efficiently extreme large files :
public IEnumerable<string> GetChunks(this string sourceString, int chunkLength)
{
using(var sr = new StringReader(sourceString))
{
var buffer = new char[chunkLength];
int read;
while((read= sr.Read(buffer, 0, chunkLength)) == chunkLength)
{
yield return new string(buffer, 0, read);
}
}
}
Actually, this works for any TextReader. StreamReader is the most common used TextReader. You can handle very large text files (IIS Log files, SharePoint Log files, etc) without having to load the whole file, but reading it line by line.
You should be able to use a regex for this. Here is an example:
//in this case n = 10 - adjust as needed
List<string> groups = (from Match m in Regex.Matches(str, ".{1,10}")
select m.Value).ToList();
string newString = String.Join(Environment.NewLine, lst.ToArray());
Refer to this question for details:
Splitting a string into chunks of a certain size
Probably not the most optimal way, but without regex:
string test = "my awesome line of text which will be split every n characters";
int nInterval = 10;
string res = String.Concat(test.Select((c, i) => i > 0 && (i % nInterval) == 0 ? c.ToString() + Environment.NewLine : c.ToString()));
Coming back to this after doing a code review, there's another way of doing the same without using Regex
public static IEnumerable<string> SplitText(string text, int length)
{
for (int i = 0; i < text.Length; i += length)
{
yield return text.Substring(i, Math.Min(length, text.Length - i));
}
}
Some code that I just wrote:
string[] SplitByLength(string line, int len, int IsB64=0) {
int i;
if (IsB64 == 1) {
// Only Allow Base64 Line Lengths without '=' padding
int mod64 = (len % 4);
if (mod64 != 0) {
len = len + (4 - mod64);
}
}
int parts = line.Length / len;
int frac = line.Length % len;
int extra = 0;
if (frac != 0) {
extra = 1;
}
string[] oline = new string[parts + extra];
for(i=0; i < parts; i++) {
oline[i] = line.Substring(0, len);
line = line.Substring(len);
}
if (extra == 1) {
oline[i] = line;
}
return oline;
}
string CRSplitByLength(string line, int len, int IsB64 = 0)
{
string[] lines = SplitByLength(line, len, IsB64);
return string.Join(System.Environment.NewLine, lines);
}
string m = "1234567890abcdefghijklmnopqrstuvwxhyz";
string[] r = SplitByLength(m, 6, 0);
foreach (string item in r) {
Console.WriteLine("{0}", item);
}