I want my checkedlistbox to expand to a certain size when the mouse enters and then go back to a its original size after mouse leaves. Below is the code is have. However, I receive an error when i have another program selected and my mouse goes over the checkedlistbox while the application is not active.
Any suggestions on how to fix?
private void checkedListBox1_MouseEnter(object sender, EventArgs e)
{
Search.ActiveForm.Height = 552;
checkedListBox1.Height = 130;
}
private void checkedListBox1_MouseLeave(object sender, EventArgs e)
{
Search.ActiveForm.Height = 452;
checkedListBox1.Height = 34;}
Error Code - Object Reference not set to an instance of an object.
Try this
private void checkedListBox1_MouseEnter(object sender, EventArgs e)
{
checkedListBox1.Size = new Size(Width,Height);
}
This of course would work so that no exception is thrown, but I hope it's also what you want:
private void checkedListBox1_MouseEnter(object sender, EventArgs e)
{
if(Search.ActiveForm == null) return;
Search.ActiveForm.Height = 552;
checkedListBox1.Height = 130;
}
private void checkedListBox1_MouseLeave(object sender, EventArgs e)
{
if(Search.ActiveForm == null) return;
Search.ActiveForm.Height = 452;
checkedListBox1.Height = 34;
}
Related
Here's what H have so far:
private void button1_Click(object sender, EventArgs e)
{
button3.BackgroundImage = slideshow_test.Properties.Resources.ai_yori_aoshi_5370;
}
private void button2_Click(object sender, EventArgs e)
{
button3.BackgroundImage = slideshow_test.Properties.Resources.AiYoriAoshi_feature;
}
private void button3_Click(object sender, EventArgs e)
{
audio.Stop();
if (button1.Enabled == true)
{
timer1.Stop();
pictureBox1.Visible = false;
System.Diagnostics.Process.Start("http://www.watchcartoononline.com/anime/ai-yori-aoshi-guide");
if (button2.Enabled == true)
{
timer1.Stop();
pictureBox1.Visible = false;
System.Diagnostics.Process.Start("http://www.watchcartoononline.com/anime/ai-yori-aoshi-enishi-guide");
}
}
}
this is only my test so far but what i want to do is change what button 3 does, i.e. if button 1 is clicked button three will open webpage 1, if button2 is clicked button 3 will open webpage 2, button 3's image will change depending, but what im finding with what i have done so far is that it opens BOTH pages AT THE SAME TIME ... how to i prevent this? i have tried if, else and else if, same result every time.
Both of your buttons are enabled, you are checking to see if the buttons are enabled or disabled (clickable or not), not which one has been clicked.
also:if (button2.Enabled == true)
is nested in the first conditional, I'm not sure if that's what you want.
You can: disable buttons 1 and 2 after their clicked so that, for instance button2.Enabled will now = false; (but then you will not be able to reclick that button)
More sophisticated, but better, is to use a delegate for the button3, and assign them in your button1_Click and button2_Click events. Something like this:
private void button1_Click(object sender, EventArgs e)
{
button3.BackgroundImage = slideshow_test.Properties.Resources.ai_yori_aoshi_5370;
button3.Click += new EventHandler(this.Button3_Click_First);
}
private void button2_Click(object sender, EventArgs e)
{
button3.BackgroundImage = slideshow_test.Properties.Resources.AiYoriAoshi_feature;
button3.Click += new EventHandler(this.Button3_Click_Second);
}
void Button3_Click_First(Object sender,
EventArgs e)
{
// When the button is clicked,
// change the button text, and disable it.
timer1.Stop();
pictureBox1.Visible = false;
System.Diagnostics.Process.Start("http://www.watchcartoononline.com/anime/ai-yori-aoshi-guide");
}
void Button3_Click_Second(Object sender,
EventArgs e)
{
timer1.Stop();
pictureBox1.Visible = false;
System.Diagnostics.Process.Start("http://www.watchcartoononline.com/anime/ai-yori-aoshi-enishi-guide");
}
You may also have to check and make sure an event handler was not previously assigned, in calse someone clicks button1, then button2, then button1 ect. This is described here: Removing event handlers
You can handle your problem by storing the URL of the webpage in a private field, setting it when buttons 1 or 2 are clicked and reading from it after clicking button 3.
private string _address = null;
private void button1_Click(object sender, EventArgs e)
{
// do other stuff
_address = "http://www.watchcartoononline.com/anime/ai-yori-aoshi-guide";
}
private void button2_Click(object sender, EventArgs e)
{
// do other stuff
_address = "http://www.watchcartoononline.com/anime/ai-yori-aoshi-enishi-guide";
}
private void button3_Click(object sender, EventArgs e)
{
if (_address != null)
{
audio.Stop();
if (button1.Enabled || button2.Enabled)
{
timer1.Stop();
pictureBox1.Visible = false;
System.Diagnostics.Process.Start(_address);
}
}
}
I wasn't sure if all the code in button3_Click is necessary, so I cleared it up a little. I might be a bit off, though.
button.Enabled is always true for all buttons by default unless you set it to false. So you cannot use button1.Enabled property to check which button is pressed. try below approach.
protected void Button1_Click(object sender, EventArgs e)
{
ViewState["Button1Clicked"] = true;
}
protected void Button2_Click(object sender, EventArgs e)
{
ViewState["Button1Clicked"] = false;
}
protected void Button3_Click(object sender, EventArgs e)
{
if ((bool)ViewState["Button1Clicked"])
{
//open webpage2 code comes here
}
else
{
//open webpage2 code comes here
}
}
I need three functions: Copy, Paste, Cut ,
For a FastColoredTextBox.. so far with my methods, the job is done but afterwards,
the cursor's position get changed and I got no clue on how to keep it where it
was before.
Here's my methods:
private void OnMouseMenuCut(object sender, EventArgs e)
{
var sPoint = rtbScript.SelectionStart;
var ePoint = rtbScript.SelectionLength;
var text = rtbScript.SelectedText;
rtbScript.Text = rtbScript.Text.Remove(sPoint, ePoint);
Clipboard.SetText(text.Replace("\n", "\r\n"));
rtbScript.Text = rtbScript.Text.Insert(sPoint, text);
}
private void OnMouseMenuCopy(object sender, EventArgs e)
{
if (string.IsNullOrEmpty(rtbScript.SelectedText)) return;
Clipboard.SetText(rtbScript.SelectedText.Replace("\n", "\r\n"));
}
private void OnMouseMenuPaste(object sender, EventArgs e)
{
if (!Clipboard.ContainsText()) return;
var index = rtbScript.SelectionStart;
rtbScript.Text = rtbScript.Text.Insert(index, Clipboard.GetText());
}
Also, If there's a better way to do those functions, please post..
Thanks!
For a RichTextBox your code has more issues than loosing the Cursor position, It also looses all formatting! Here are versions that should work better:
private void OnMouseMenuCut(object sender, EventArgs e)
{
var sPoint = rtbScript.SelectionStart;
var text = rtbScript.SelectedText;
rtbScript.Cut();
Clipboard.SetText(text.Replace("\n", "\r\n"));
rtbScript.SelectionStart = sPoint;
}
private void OnMouseMenuCopy(object sender, EventArgs e)
{
if (string.IsNullOrEmpty(rtbScript.SelectedText)) return;
Clipboard.SetText(rtbScript.SelectedText.Replace("\n", "\r\n"));
}
private void OnMouseMenuPaste(object sender, EventArgs e)
{
if (!Clipboard.ContainsText()) return;
var index = rtbScript.SelectionStart;
rtbScript.SelectedText = Clipboard.GetText();
rtbScript.SelectionStart = index + Clipboard.GetText().Length;
}
Note: You must never change the Text property of a RTB or else you will mess up the formating!
Since you wrote that this also works with your FastColoredTextBox I have undeleted the solution..
In the current version of FCTB, these methods already exist inside the FCTB.cs file. They just need to be linked up.
I'm trying to get the value of radio button selection to my listbox, but the listbox always gets the same value even though selection was different. Please help, I am a newbie to coding, I couldn't find any answers on the net either..
Here are the codes I've written:
void rdbtnOne_CheckedChanged(object sender, EventArgs e)
{
if (rdbtnOne.Checked == true)
{
rdbtnOne.Text = "Men";
}
else
{
rdbtnOne.Text = "Women";
}
}
void btnOne_Click(object sender, EventArgs e)
{
lstOne.Items.Add(i + rdbtnOne.Text);
i++;
}
Ok, I have found the solution, FINALLY. The reason that my code did not work in the first place was because I tried to give value by equaling rdbtnOne.Text directly. Instead I created another value to equal it. All right here is how it worked for me:
string MenOrWomen;
void rdbtnTwo_CheckedChanged(object sender, EventArgs e)
{
if (rdbtnTwo.Checked.Equals(true))
{
MenOrWomen = "Women";
}
else
{
MenOrWomen = "Men";
}
}
void rdbtnOne_CheckedChanged(object sender, EventArgs e)
{
if (rdbtnOne.Checked.Equals(true))
{
MenOrWomen = "Men";
}
else
{
MenOrWomen = "Women";
}
}
int i = 1;
void btnOne_Click(object sender, EventArgs e)
{
lstOne.Items.Add(i + MenOrWomen);
i++;
}
I am trying to clear the contents of a listbox when a new tab is seleced. Here is what I got, but nothing happens.
private void tabControl1_SelectedIndexChanged(object sender, EventArgs e)
{
if (tabControl1.SelectedTab == tabControl1.TabPages["entryTab"])
{
readBox.Items.Clear();
reminderBox.Items.Clear();
}
}
Try something like this in your form load
tabControl1.Selecting += new TabControlCancelEventHandler(tabControl1_SelectedIndexChanged);
// Try this set null to DataSource
private void tabControl1_SelectedIndexChanged(object sender, EventArgs e)
{
if (tabControl1.SelectedTab == tabControl1.TabPages["entryTab"])
{
readBox.DataSource = null;
reminderBox.DataSource = null;
}
}
I have been working on this project for a few days, it’s a C# Windows Visual Studio 2010 form and I have been posting different questions that relate to the same project; as I was told to post different questions instead on having them all in the same post. So this is the project: create a form with two ListBoxes—one contains at least four font names and the other contains at least four font sizes. Let the first item in each list be the default selection if the user fails to make a selection. Allow only one selection per ListBox. After the user clicks a button, display "Hello" in the selected font and size.
This time I’m having a problem getting the message in the textbox to display according to the font type and size that the user selected. Here is where I’m at in the coding:
public Form1()
{
InitializeComponent();
//populate listbox1
listBox1.Items.Add("Arial");
listBox1.Items.Add("Calibri");
listBox1.Items.Add("Times New Roman");
listBox1.Items.Add("Verdana");
//populate listbox2
listBox2.Items.Add("8");
listBox2.Items.Add("10");
listBox2.Items.Add("12");
listBox2.Items.Add("14");
this.listBox1.SelectedIndexChanged += new System.EventHandler(this.listBox1_SelectedIndexChanged);
listBox1.SelectedIndex = 0; // <--- set default selection for listBox1
this.listBox2.SelectedIndexChanged += new System.EventHandler(this.listBox2_SelectedIndexChanged);
listBox2.SelectedIndex = 0; // <--- set default selection for listBox2
}
private void listBox1_SelectedIndexChanged(object sender, EventArgs e)
{
textBox1.Text = listBox1.SelectedItem.ToString();
}
private void listBox2_SelectedIndexChanged(object sender, EventArgs e)
{
textBox1.Text = listBox2.SelectedItem.ToString();
}
private void textBox1_TextChanged(object sender, EventArgs e)
{
textBox1.Text = "Hello!";
}
private void button1_Click(object sender, EventArgs e)
{
}
}
}
Now I'm trying to elicit a call from a button clicked that will display the message "Hello" in the user’s choice of font and font size. Any suggestions would be greatly appreciated.
remove this method:
private void textBox1_TextChanged(object sender, EventArgs e)
{
textBox1.Text = "Hello!";
}
in the button_click event of your button, add this :
private void button1_Click(object sender, EventArgs e)
{
textBox1.Text = "hello";
textBox1.Font = new Font(listBox1.SelectedItem.ToString(), Convert.ToInt32(listBox2.SelectedItem.ToString()));
}
you might want to remove the selectedindexchanged methods in your code if you are going to use a button tho. depends on what you want.
edit:
public Form2()
{
InitializeComponent();
listBox1.Items.Add("Arial");
listBox1.Items.Add("Calibri");
listBox1.Items.Add("Times New Roman");
listBox1.Items.Add("Verdana");
listBox2.Items.Add("8");
listBox2.Items.Add("10");
listBox2.Items.Add("12");
listBox2.Items.Add("14");
listBox1.SelectedIndex = 0;
listBox2.SelectedIndex = 0;
}
private void button1_Click(object sender, EventArgs e)
{
textBox1.Text = "hello";
textBox1.Font = new Font(listBox1.SelectedItem.ToString(), Convert.ToInt32(listBox2.SelectedItem.ToString()));
}
if you just use the above code everything should work as you want it to. I tried it out myself and it's working fine for me
This was my final submission. Thanks for all of the advice guys.
public Form1()
{
InitializeComponent();
//populate listbox1
listBox1.Items.Add("Arial");
listBox1.Items.Add("Calibri");
listBox1.Items.Add("Times New Roman");
listBox1.Items.Add("Verdana");
listBox1.SelectedIndex = 0; // <--- set default selection for listBox1
//populate listbox2
listBox2.Items.Add("8");
listBox2.Items.Add("10");
listBox2.Items.Add("12");
listBox2.Items.Add("14");
listBox2.SelectedIndex = 0; // <--- set default selection for listBox2
}
private void button1_Click(object sender, EventArgs e)
{
textBox1.Text = "hello";
textBox1.Font = new Font(listBox1.SelectedItem.ToString(), Convert.ToInt32(listBox2.SelectedItem.ToString()));
}
private void listBox1_SelectedIndexChanged(object sender, EventArgs e)
{
}
private void listBox2_SelectedIndexChanged(object sender, EventArgs e)
{
}
private void textBox1_TextChanged(object sender, EventArgs e)
{
}
}
}