I want to know how can I achieve this goal?
private void btnProcess_Click(object sender, EventArgs e)
{
timer1.Start();
//100 plus line of code here
timer1.Stop();
}
int i = 0;
private void timer1_Tick(object sender, EventArgs e)
{
i++;
label1.text = i.toString();
}
I want to happen is that when I press the button the timer will run and display the time in label1.text and it will stop until it will reach the timer stop function
var sw = Stopwatch.StartNew();
//100 lines of code...
label1.Text = sw.Elapsed.ToString();
???
Related
I need to use progressbar.value property at different locations. But the problem is, while executing it shows only maximum value given. I need to stop at 25% and 75% and after some delay, 100%. How can I overcome this problem. Thanks in Advance...
C#
namespace ProgressBarWindowForm
{
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
}
public void Form1_Load(object sender, System.EventArgs e)
{
label1.Hide();
progressBar1.Minimum = 0;
progressBar1.Maximum = 100;
}
private void button1_Click(object sender, EventArgs e)
{
progressBar1.Value = 25;
if (progressBar1.Value == 25)
{
label1.Show();
label1.Text = "Process Complete 25%";
}
progressBar1.Value = 75;
if (progressBar1.Value == 75)
{
label1.Show();
label1.Text = "Process Complete 75%";
}
}
}
}
Progressbar control name is progressBar1,
Label name is label1 and
Button name is button1
When I Clicked the Button, progressbar value is directly filling with 75%. I want to stop it at 25% and after some delay it should fill 75% and then 100%...Can anyone help..Can I use "progressBar1.value" only Once or as many times I need?
try this,Drag and drop background worker in windows form
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
backgroundWorker1.WorkerReportsProgress = true;
// This event will be raised on the worker thread when the worker starts
backgroundWorker1.DoWork += new DoWorkEventHandler(backgroundWorker1_DoWork);
// This event will be raised when we call ReportProgress
backgroundWorker1.ProgressChanged += new ProgressChangedEventHandler(backgroundWorker1_ProgressChanged);
}
private void button1_Click(object sender, EventArgs e)
{
// Start the background worker
backgroundWorker1.RunWorkerAsync();
}
// On worker thread so do our thing!
void backgroundWorker1_DoWork(object sender, DoWorkEventArgs e)
{
// Your background task goes here
for (int i = 0; i <= 100; i++)
{
// Report progress to 'UI' thread
backgroundWorker1.ReportProgress(i);
// Simulate long task
if (label1.InvokeRequired)
{
label1.Invoke(new MethodInvoker(delegate
{
label1.Show();
label1.Text = "Process Complete " + progressBar1.Value + "%";
}));
}
if (progressBar1.Value == 25 || progressBar1.Value == 75)
{
System.Threading.Thread.Sleep(1000);
}
System.Threading.Thread.Sleep(100);
}
}
// Back on the 'UI' thread so we can update the progress bar
void backgroundWorker1_ProgressChanged(object sender, ProgressChangedEventArgs e)
{
// The progress percentage is a property of e
progressBar1.Value = e.ProgressPercentage;
}
}
Use a Timer to update the progress bar after a delay:
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
timer.Tick += Timer_Tick;
timer.Interval = 1000; // delay: 1000 milliseconds
}
Timer timer = new Timer();
private void Timer_Tick(object sender, EventArgs e)
{
if (progressBar1.Value == 100)
{
timer.Stop();
return;
}
progressBar1.Value += 25;
}
private void button1_Click(object sender, EventArgs e)
{
progressBar1.Value = 25;
timer.Start();
}
}
Its simple to update progressBar values in button click, you can initialize the properties in the page load or else use the designer, in page load it would be like the following:
private int ProgressPercentage = 10;
public void Form1_Load(object sender, System.EventArgs e)
{
progressBar1.Minimum = 0;
progressBar1.Maximum = 100;
progressBar1.Value = 0;
}
So the initialization completed, now you can code the button click like the following, through which you can update the progress bar in every button click:
private void button1_Click(object sender, EventArgs e)
{
progressBar1.Value += ProgressPercentage;
label1.Text = String.Format("Process Complete {0}%",progressBar1.Value);
}
If you want the update to be happens automatically in a particular interval means you can make use of a timer and enable the timer in the button click. Here you can find a similar thread which can be used to implement timer to your scene.
Update as per your comment, calling a delay will not be a best practice, you can make use a timer here as like the following:
System.Windows.Forms.Timer proTimer = new System.Windows.Forms.Timer();
private void Form1_Load(object sender, EventArgs e)
{
proTimer.Interval = 1000;
progressBar1.Minimum = 0;
progressBar1.Maximum = 100;
progressBar1.Value = 0;
proTimer.Tick += new EventHandler(proTimer_Tick);
}
private void button1_Click(object sender, EventArgs e)
{
proTimer.Enabled = true;
proTimer.Start();
}
// Timer event
void proTimer_Tick(object sender, EventArgs e)
{
progressBar1.Value += ProgressPercentage;
label1.Text = String.Format("Process Complete {0}%",progressBar1.Value);
if (progressBar1.Value == 100)
{
proTimer.Stop();
proTimer.Enbled = false;
}
}
You need to add a delay inbetween the changes. As of now, the button advance the bar to 25, sets the label, then advances the bar to 75 without pausing.
System.Threading.Thread.Sleep(n); will sleep n milliseconds, which you will need after the statement setting the 25 percent marker.
EDIT
If you want it the value to only progress on a button click, you will need to check the value of the progress bar before you advance it.
In pseudo code, something like:
onclick() {
if (progress == 0) {
progress = 25
label = the25MarkText
} else if (progress == 25) {
progress = 75
label = the75MarkText
}
}
I would like to make my timer count down based on user input.
This is what my form looks like:
and this is my code:
private int counter=80;
DateTime dt = new DateTime();
private void button1_Click(object sender, EventArgs e)
{
progressBar1.Maximum = counter * 1000;
progressBar1.Step = 1000;
timer1 = new System.Windows.Forms.Timer();
timer1.Tick += new EventHandler(timer1_Tick);
timer1.Interval = 1000;
timer1.Start();
textBox1.Text = counter.ToString();
}
private void timer1_Tick(object sender, EventArgs e)
{
counter--;
progressBar1.PerformStep();
if (counter == 0)
{
timer1.Stop();
}
textBox1.Text = dt.AddSeconds(counter).ToString("mm:ss");
}
private void Form1_Load(object sender, EventArgs e)
{
timer1.Enabled = false;
}
private void button2_Click(object sender, EventArgs e)
{
timer1.Stop();
textBox1.Clear();
progressBar1.Value = 0;
}
How can I update the timer if the user enters a new value in the textbox?
Attach an OnTextChanged eventhandler to your textbox1. Stop the timer when textinput changes
protect void textinput1_OnTextChange(object sender, EventArg e) {
button2_Click(sender, e);
}
Or you can disable user input when timer starts and re-enable it once timer stopped.
Simply set textbox enabled value to false at start button clicked. And enable it again at stop of timer or checked on cancel button. Here is a code:
textBox1.Enabled = false;And
textBox1.Enabled = true;
So I just started learning C# and using forms. I have been able to create a digital clock and tinker with this and that, but now I'm trying to make a basic UI for a derpy game and my timer doesn't work.
First - what I'm trying to accomplish: A simple decrementing timer from 60 seconds (*clock style (mm:ss)).
Second, here's what I have:
public partial class Form1 : Form
{
private int counter = 60;
public Form1()
{
InitializeComponent();
label1.Text = TimeSpan.FromMinutes(1).ToString("m\\:ss");
}
private void pictureBox2_Click(object sender, EventArgs e)
{
}
private void timer1_Tick(object sender, EventArgs e)
{
counter--;
if (counter == 0)
{
timer1.Stop();
label1.Text = counter.ToString();
MessageBox.Show("Time's Up!!");
}
}
private void label1_Click(object sender, EventArgs e)
{
var startTime = DateTime.Now;
var counter = (TimeSpan.FromMinutes(1)).ToString("m\\:ss");
timer1 = new Timer();
timer1.Tick += new EventHandler(timer1_Tick);
timer1.Interval = 1000;
timer1.Start();
label1.Text = counter.ToString();
}
}
Appreciate the feedback and knowledge!
From the codes that I see, your timer is working but you are not updating it in each count, you are updating when the timer finishes -
private void timer1_Tick(object sender, EventArgs e)
{
counter--;
if (counter == 0)
{
timer1.Stop();
label1.Text = counter.ToString(); // *** Look here
MessageBox.Show("Time's Up!!");
}
}
You should update the timer in each tick, so take the update label code out of the if block -
private void timer1_Tick(object sender, EventArgs e)
{
counter--;
label1.Text = counter.ToString(); // should work
if (counter == 0)
{
timer1.Stop();
MessageBox.Show("Time's Up!!");
}
}
and also reset the counter in each cycle -
private void label1_Click(object sender, EventArgs e)
{
var startTime = DateTime.Now;
var counter = (TimeSpan.FromMinutes(1)).ToString("m\\:ss");
timer1 = new Timer();
timer1.Tick += new EventHandler(timer1_Tick);
timer1.Interval = 1000;
timer1.Start();
label1.Text = counter.ToString();
this.counter = 60
}
NOTE: I am really not sure if this code will throw any access
violation error, due to updating the UI in a different thread or not.
If so, then you have to use async/await or events/delegates to
update UI.
Let me know, if this throws error, then I will give you the async/await version.
This works fine for me. I would give progress updates as the time is countdown to show that it is working. For example, if you did this in label, you could do something like the following:
private void timer1_Tick(object sender, EventArgs e)
{
counter--;
label1.Text = counter.ToString();
if (counter == 0)
{
timer1.Stop();
MessageBox.Show("Time's Up!!");
}
}
Notice that the label1.Text = counter.ToString(); line has been moved before the counter == 0 check, so that it is able to provide feedback for all counter values.
As well, you may accidentally launch several timer1 instances if you do not keep track of how many you spawn using new Timer(). There are various ways to do this, but you could simply check whether timer1 already exists and counter == 0 before creating a new instance. You could perform this check as a guard clause (ie. return if either of those conditions are matched).
private void label1_Click(object sender, EventArgs e)
{
var startTime = DateTime.Now;
if (timer1 == null || (timer1 != null && counter == 0)) return;
counter = (TimeSpan.FromMinutes(1)).ToString("m\\:ss");
timer1 = new Timer();
timer1.Tick += new EventHandler(timer1_Tick);
timer1.Interval = 1000;
timer1.Start();
label1.Text = counter.ToString();
}
If you want this countdown to start automatically, you can put this directly into the constructor, or put it into another method and call it from the constructor like so:
public Form1()
{
InitializeComponent();
StartCountdown();
}
private void StartCountdown()
{
var startTime = DateTime.Now;
/* the rest of your original label1_Click code goes here ... */
}
I create following form and I click 3 buttons (randomly). After I click a button, it must show a related message after 3 seconds from clicking it. But if I had clicked another button in the meanwhile, then the related message of that button has to be shown and the previous message in the queue has to be canceled.
As an example, if I click button1 at 11.30.00, then related message should pop up only at 11.30.03 like "You clicked : 1 before 3 Seconds". But if I click another button2 before the 11.30.03, say at 11.30.02 then related message should pop up at 11.30.05 like "You clicked : 2 before 3 Seconds" and the message scheduled for 11.30.03 has to be canceled.
This is my code:
private int signal = 0;
public Form1()
{
InitializeComponent();
}
private void button1_Click(object sender, EventArgs e)
{
signal = 1;
displayMessage(signal);
}
private void button2_Click(object sender, EventArgs e)
{
signal = 2;
displayMessage(signal);
}
private void button3_Click(object sender, EventArgs e)
{
signal = 3;
displayMessage(signal);
}
private void displayMessage(int number)
{
MessageBox.Show("You clicked : "+number+ "before 3 Seconds");
}
Set buttons Tag:
button1.Tag = 1;
button2.Tag = 2;
button3.Tag = 3;
then set Click event:
button1.Click += button_Click;
button2.Click += button_Click;
button3.Click += button_Click;
on the Click event:
private void button_Click(object sender, EventArgs e)
{
signal = (int) ((Button))sender.Tag;
displayMessage(signal);
}
Start a timer. Keep changing signal value according to button click, and when time elapsed is equal to 3 seconds, show up the messagebox from tick event. Set the timer interval according to your need and that will be reflected in the "related message".
int signal = 0;
System.Timers.Timer t = new System.Timers.Timer(3000);
private void Form1_Load(object sender, EventArgs e)
{
//----------------------- other parts of code ---------------------
// at last
t.Elapsed += new System.Timers.ElapsedEventHandler(t_Elapsed);
t.Start();
}
void t_Elapsed(object sender, System.Timers.ElapsedEventArgs e)
{
if (signal == 0)
return;
t.Stop();
MessageBox.Show("You clicked: " + signal + " before " + t.Interval + " Seconds");
signal = 0;
t.Start(); //move this to top of msgbox if you want timer to be reset right after poppin the msgbox.
}
private void button1_Click(object sender, EventArgs e)
{
signal = 1;
t.Stop();
t.Start();
}
private void button2_Click(object sender, EventArgs e)
{
signal = 2;
t.Stop();
t.Start();
}
private void button3_Click(object sender, EventArgs e)
{
signal = 3;
t.Stop();
t.Start();
}
This isn't a place where someone is just going to give you an answer, do some research into the area then post if you get stuck.
you want to create a static timer and check if its finished within each event
http://msdn.microsoft.com/en-us/library/79b3xss3(v=vs.80).aspx
http://msdn.microsoft.com/en-us/library/system.timers.timer(v=vs.71).aspx
I have a timer and in 30 minutes I want to count clicks and show it in a textbox. but how? here is timer code:
decimal sure = 10;
private void button1_Click(object sender, EventArgs e)
{
button1.Enabled = true;
timer1.Start();
}
private void timer1_Tick(object sender, EventArgs e)
{
sure--;
label3.Text = sure.ToString();
if (sure == 0)
{
timer1.Stop();
MessageBox.Show("Süre doldu");
}
}
Declare your clickCounter at global, and raise your counter++ in Mouse Click Event.
If you do it more specific, you can use Background Worker, to track time.
and use Application.DoEvents() to write remaining to to textBox
Put a button, 2 labels, and a timer. rename labels with lblClickCount and lblRemainingTime
private int clickCounter = 0;
private void button1_Click(object sender, EventArgs e)
{
clickCounter++;
lblClickCount.Text = clickCounter.ToString();
}
decimal sure = 10;
private void timer1_Tick(object sender, EventArgs e)
{
sure--;
lblRemainingTime.Text = sure.ToString();
Application.DoEvents();
if (sure == 0)
{
timer1.Stop();
MessageBox.Show("Süre doldu. Toplam tiklama sayisi:" + clickCounter.ToString());
}
}
If you wanted to reuse buttoN1 to count the clicks but not Start new timer you can add a if around the code you want to protect.
bool hasTimerStarted = false;
int numberOfClicks = 0;
private void button1_Click(object sender, EventArgs e)
{
if(!hasTimerStarted)
{
button1.Enabled = true;
timer1.Start();
hasTimerStarted = true;
}
++numberOfClicks;
}
When the timer expires you reset the count and if the timer has started.
private void timer1_Tick(object sender, EventArgs e)
{
TimeSpan ts = stopWatch.Elapsed;
// Format and display the TimeSpan value.
string elapsedTime = String.Format("{0:00}:{1:00}:{2:00}.{3:00}",
ts.Hours, ts.Minutes, ts.Seconds,
ts.Milliseconds / 10);
label3.Text = elapsedTime;
labelClicks.Text = "User clicked " + clicksNo.toString() + "nt times..";
if (stopWatch.ElapsedMilliseconds >= this.minutes * 60 * 1000)
{
timer1.Stop();
MessageBox.Show("Time elapsed.");
hasTimerStarted = false;
numberOfClicks = 0;
}
}