So I'm attempting to print a multiplication table in C# however I can't quite figure out how to get what I need.
So far my program outputs the following:
1 2 3
2 4 6
3 6 9
However, I need it to output this:
0 1 2 3
1 1 2 3
2 2 4 6
3 3 6 9
I've tried a lot of different ways to get the second output however I can't quite figure it out. I'm not necessarily asking for an answer but if someone could point me in the right direction it would be much appreciated.
This is the code I have as of now:
static void Main(string[] args)
{
for (int i = 1; i <= 3; i++)
{
for (int j = 1; j <= 3; j++)
{
Console.Write(i * j + "\t");
}
Console.Write("\n");
}
Console.ReadLine();
}
for (int i = 0; i <= 3; i++)
{
Console.Write(i + "\t");
for (int j = 1; j <= 3; j++)
{
if (i>0) Console.Write(i * j + "\t");
else Console.Write(j + "\t");
}
Console.Write("\n");
}
int tbl= int.Parse(Console.ReadLine());
int j = int.Parse(Console.ReadLine());
for (int i=1; i<=10; i++)
{
for (int j=1;j<=10; j++)
{
Console.WriteLine("{0}*{1}={2}", i, j, (i * j));`enter code here`
}
}
Console.ReadLine();
You should skip both 0's.
for (int i = 0; i <= 3; i++)
{
for (int j = 0; j <= 3; j++)
{
Console.Write((i == 0? j : (j == 0? i : i*j)) + "\t");
}
Console.Write("\n");
}
You could try one of this three solutions.
Solution 1 (without if else statement):
static void Main(string[] args)
{
for (int i = 0; i <= 3; i++)
{
Console.Write("{0}\t", i);
for (int j = 1; j <= 3; j++)
{
Console.Write("{0}\t", i * j);
}
Console.WriteLine();
}
Console.ReadLine();
}
Solution 2 (With if else statement):
static void Main(string[] args)
{
for (int i = 0; i <= 3; i++)
{
for (int j = 1; j <= 3; j++)
{
if (i == 0)
{
Console.Write("{0}\t", i);
}
else
{
Console.Write("{0}\t", i * j);
}
}
Console.WriteLine();
}
Console.ReadLine();
}
Solution 3 (With short-hand if else statement):
static void Main(string[] args)
{
for (int i = 0; i <= 3; i++)
{
for (int j = 1; j <= 3; j++)
{
Console.Write("{0}\t", (i == 0) ? i : i * j);
}
Console.WriteLine();
}
Console.ReadLine();
}
for (int i = 0; i <= 3; i++)
{
for (int j = 0; j <= 3; j++)
{
if (i == 0)
{
Console.Write(j);
}
else
{
if(j == 0)
{
Console.Write(i);
}
else
{
Console.Write(i * j);
}
}
}
Console.Write("\n");
}
Console.WriteLine("Enter A Number");
int j = Convert.ToInt32(Console.ReadLine());
for (int i = 0 ; i <= 10; i++) {
Console.WriteLine("{1} X {0} = {2}",i,j,i*j);
Console.ReadLine();
}
public class Program
{
//int num;
public static void Main(string[] args)
{
int num,num1;
Console.WriteLine("enter a any number num");
num = Convert.ToInt32(Console.ReadLine());
Console.WriteLine("enter any second number num1");
num1 = Convert.ToInt32(Console.ReadLine());
for(int i = num;i <= num1; i++)
{
for (int j = 1; j <= 10; j++)
{
Console.Write(i *j+ "\t");
}
}
Console.Write("\n");
}
}
using System;
/*
* Write a console-based application that displays a multiplication table of the product of
* every integer from 1 through 10 multiplied by every integer from 1 through 10. Save the
* file as DisplayMultiplicationTable.cs.
*/
namespace MultiplicationTable
{
class Program
{
static void Main(string[] args)
{
Console.WriteLine("\t\t\t\t\t\t\t\t\tMultiplication Table");
Console.WriteLine("------------------------------------------------------------------------------------------------------------------------------------------------------------");
const int END = 11;
for(int x = 1; x < END; x++)
{
for(int y = 1; y < END; y++)
{
int value = x * y;
Console.Write("{0} * {1} = {2}\t", y, x, value);
}
Console.WriteLine();
}
Console.ReadLine();
}
}
}
Output
Output of Code
I am attempting to complete the above code in a GUI. So far I have come up with the following code; but the output is not like the above output.
My Code for the GUI is as follows:
using System;
using System.Windows.Forms;
namespace DisplayMultiplicationTableGUI
{
public partial class Form1:Form
{
public Form1()
{
InitializeComponent();
}
private void ShowTableButton_Click(object sender, EventArgs e)
{
int a;
int b;
const int STOP = 11;
for(a = 1; a < STOP; a++)
{
for(b = 1; b < STOP; b++)
{
int value = a * b;
multiplicationTableLabel.Text += String.Format("{0} * {1} = {2} ", b, a, value);
}
multiplicationTableLabel.Text += "\n";
}
}
}
}
Related
I need help with checking IF the position in array must save ' ' or '*' for later in program to print out a pyramid.
static void Main(string[] args)
{
Console.WriteLine("Enter size: ");
int s = int.Parse(Console.ReadLine());
char[,] pyramid = new char[s, s * 2 - 1];
FillArray(pyramid);
Out(pyramid);
Console.ReadLine();
}
static void FillArray(char[,] t)
{
for (int i = 0; i < t.GetLength(0); i++)
{
for (int j = 0; j < t.GetLength(1); j++)
{
if (j == t.GetLength(1) / 2 || j == t.GetLength(1) / 2 + i || j == t.GetLength(1) / 2 - i)
{
t[i, j] = '*';
}
else t[i, j] = ' ';
}
}
}
static void Out(char[,] t)
{
for (int i = 0; i < t.GetLength(0); i++)
{
for (int j = 0; j < t.GetLength(1); j++)
{
Console.Write(t[i, j]);
}
Console.WriteLine();
}
}
At the moment I get out something like this:
The code should be like this
int i, j, n;
Console.WriteLine("Enter size: ");
n = int.Parse(Console.ReadLine());
for (i = 0; i < n; i++)
{
for (j = 1; j <= n - i; j++)
Console.Write(" ");
for (j = 1; j <= 2 * i - 1; j++)
Console.Write("*");
Console.Write("\n");
}
class Triangle
{
static void Main(string[] args)
{
int i,j,k,odd=1,size,s=0;
Console.Write("Enter the Size:");
size = Convert.ToInt32(Console.ReadLine());
int nofSpaces=size-1;
for (i = 1; i <= size; i++)
{
for (k = 1; k <= nofSpaces; k++)
{
Console.Write(" ");
}
for (j = 1; j <= odd; j++)
{
if (i >= j)
{
s = s + 1;
}
else
{
s = s - 1;
}
Console.Write(s);
}
Console.Write("\n");
odd = odd + 2;
nofSpaces = nofSpaces - 1;
}
Console.ReadKey();
}
}
This is the code and it gives the following result:
1
232
34543
4567654
56789875
But I need the result like this:
1
121
12321
1234321
---------
Any help would be greatly appreciated. Thank you.
Add
s = 0;
at the right line in your code.
class Triangle
{
static void Main(string[] args)
{
int i,j,k,odd=1,size;
Console.Write("Enter the Size:");
size = Convert.ToInt32(Console.ReadLine());
int nofSpaces=size-1;
int s = 0;
for (i = 1; i <= size; i++)
{
int g = 0;
for (k = 1; k <= nofSpaces; k++)
{
Console.Write(" ");
}
for (j = 1; j <= odd; j++)
{
if (i >= j)
{
Console.Write(j);
g = j;
}
else
{
//for (int n = j-1; n >= i; n--)
//{
// Console.Write(n - 1);
//}
Console.Write(--g);
}
}
Console.Write("\n");
odd = odd + 2;
nofSpaces = nofSpaces - 1;
}
Console.ReadKey();
}
}
}
Thank you All!... The above code is working....
You should try this...
This is a simple example with for loops
class Triangle
{
static void Main(string[] args)
{
int size;
Console.Write("Enter the Size:");
size = Convert.ToInt32(Console.ReadLine());
for (int i = 0; i < size; i++)
{
for (int j = size ; j > i; j--)
{
Console.Write(" ");
}
for (int x = 1; x <= i; x++)
{
Console.Write(x);
}
for (int j = i-1; j > 0; j--)
{
Console.Write(j);
}
Console.WriteLine();
}
Console.ReadKey();
}
}
Please write as below
static void Main(string[] args)
{
int i, j, k, odd = 1, size, s = 0;
Console.Write("Enter the Size:");
size = Convert.ToInt32(Console.ReadLine());
int nofSpaces = size - 1;
for (i = 1; i <= size; i++)
{
for (k = 1; k <= nofSpaces; k++)
{
Console.Write(" ");
}
s = 0;
for (j = 1; j <= odd; j++)
{
if (i >= j)
{
s = s + 1;
}
else
{
s = s - 1;
}
Console.Write(s);
}
Console.Write("\n");
odd = odd + 2;
nofSpaces = nofSpaces - 1;
}
Console.ReadKey();
}
class Program
{
static void Main(string[] args)
{
Console.WriteLine(" Multiplication Tables");
for (int i = 2; i <= 12; i++)
{
for (int j = 1; j <= 10; j++)
{
Console.WriteLine("{0}*{1}={2}", i, j, i*j);
}
Console.ReadLine();
}
}
}
I want to print multiplication tables from 2 to 12, with the above code I am able to print only one table. I didn't get why the first loop counter was not incrementing.
Any help appreciated.
It's waiting for input after each inner loop.
Remove:
Console.ReadLine();
From your outer loop, and add it to the end.
class Program
{
static void Main(string[] args)
{
Console.WriteLine(" Multiplication Tables");
for (int i = 2; i <= 12; i++)
{
for (int j = 1; j <= 10; j++)
{
Console.WriteLine("{0}*{1}={2}", i, j, i*j);
}
}
Console.ReadLine(); // <-- Both loops now complete
}
}
/* multiply of 2 to 12;*/
using System;
namespace multiply
{
class Program
{
static void Main(string[] args)
{
int a, b;
for (a=1; a <= 12; a++) {
Console.Write("\n");
for (b = 1; b <= 10; b++)
{
Console.Write("\n "+a* b);
}
}
Console.Read();
}
}
}
I have written this segment of C# to help me understand how nested for loops can be used to render 2 dimensional data.
Here is what the output looks like.
████
███
██
█
I would like to make it so that the 4 blocks up top are rendered at the bottom, basically in the reverse order so that the steps ascend. However the console window only renders downward, so the conventional thinking won't be right. The following is my code.
static void Main(string[] args)
{
int i = 0;
int j = 0;
for (i = 0; i < 4; i++)
{
Console.Write('\n');
for (j = i; j < 4; j++)
{
Console.Write("█");
}
}
Console.ReadKey();
}
This is what I'd like the output to look like.
█
██
███
████
You need to reverse your loop condition from inremant to decremant..
for (i = 0; i < 4; i++)
{
Console.Write('\n');
for (j = i; j >= 0; j--)
{
Console.Write("█");
}
}
Output will be;
Here is a DEMO.
UPDATE: Since you change your mind, you need to add space every column (column number isi) 4 - 1 times.
public static void Main(string[] args)
{
int i = 0;
int j = 0;
for ( i = 0; i < 4; i++ )
{
for ( j = 0; j < 4; j++ )
{
if ( j < 3 - i )
Console.Write(" ");
else
Console.Write("█");
}
Console.Write('\n');
}
Console.ReadKey();
}
Here is a DEMO.
class Program
{
const int Dimension = 4;
static void Main(string[] args)
{
char[] blocks = new char[Dimension];
for (int j = 0; j < Dimension; j++)
blocks[j] = ' ';
for (int i = 0; i < Dimension; i++)
{
blocks[Dimension - i - 1] = '█';
for (int j = 0; j < Dimension; j++)
Console.Write(blocks[j]);
Console.WriteLine();
}
Console.ReadKey();
}
}
Should be:
for (j = 3 - i; j < 4; j++)
{
Console.Write("█");
}
The easiest way would be: just reverse your inner loop condition and decrement the counter instead of incrementing it:
for (i = 0; i < 4; i++)
{
Console.Write('\n');
for (j = i; j >= 0; j--)
{
Console.Write("█");
}
}
Console.ReadKey();
returning:
█
██
███
████
And for right-to-left version:
for (i = 0; i < 4; i++)
{
for(j = 0; j < 4; j++)
{
if(j < 3 - i)
Console.Write(" ");
else
Console.Write("█");
}
Console.Write('\n');
}
Console.ReadKey();
with a result:
█
██
███
████
Hello everyone
I try to solve asterisk tree problem
and found my code is not work correctly and can be improved.
This is output that expected
input : 5
*
* * *
* * * * *
* * *
*
input : 4
* * * *
* *
* * * *
and this is my code
static void Main(string[] args)
{
Console.Write("input:");
char input = Console.ReadKey().KeyChar;
if (char.IsDigit(input))
{
int couter = (int)char.GetNumericValue(input);
Console.WriteLine();
if (couter % 2 != 0)
{
for (int i = 1; i <= couter; i++)
{
for (int j = 3; j > i; j--)
{
Console.Write(" ");
}
for (int k = 1; k <= i; k++)
{
Console.Write(" *");
}
Console.WriteLine();
}
for (int i = couter - 1; i >= 3; i--)
{
for (int j = 1; j <= i; j++)
{
if (j <= couter - i)
{
Console.Write(" ");
}
else
{
Console.Write("* ");
}
}
Console.WriteLine();
}
}
else
{
for (int i = couter; i > 3; i--)
{
for (int j = 1; j <= i; j++)
{
if (couter - i >= j)
{
Console.Write(" ");
}
else
{
Console.Write("* ");
}
}
Console.WriteLine();
}
for (int i = couter - 1; i <= couter; i++)
{
for (int j = 0; j < i; j++)
{
Console.Write("* ");
}
Console.WriteLine();
}
}
}
}
Please could you help me to solve this problem.
Lately, I think I'm poor at algorithms and a little complex problem. Is anybody know useful link or how I can improve this skill, please let me know.
Thanks,
Check this page for input 5 (diamond) : http://www.dreamincode.net/forums/topic/126715-diamond-asterisk/
I've translated it to C# - now it displays diamonds with size that you set in variable 'rows':
int rows = 5;
StringBuilder sb = new StringBuilder();
// top part
for (int i = 1; i <= rows; i++)
{
for (int j = 1; j <= rows - i; j++)
sb.Append(' ');
for (int k = 1; k <= 2 * i - 1; k++)
sb.Append('*');
sb.AppendLine();
}
//bottom part
for (int n = rows - 1; n > 0; n--)
{
for (int l = 1; l <= rows - n; l++)
sb.Append(' ');
for (int m = 1; m <= 2 * n - 1; m++)
sb.Append('*');
sb.AppendLine();
}
Console.Write(sb.ToString());
I was initially reluctant to post it because it definitely smells like homework...
Anyway, here's a piece of working code:
static void Main(string[] args)
{
Console.Write("input:");
char input = Console.ReadKey().KeyChar;
if (char.IsDigit(input))
{
int couter = (int)char.GetNumericValue(input);
Console.WriteLine();
if (couter % 2 != 0)
PrintDiamond(couter);
else
PrintHourGlass(couter);
}
Console.ReadLine();
}
private static void PrintDiamond(int couter)
{
bool moreAsterisks = true;
for (int row = 0; row < couter; row++)
{
int nAsterisks = moreAsterisks ? (2 * row) + 1 : 2 * (couter - row - 1) + 1;
int nSpaces = (couter - nAsterisks) / 2;
if (row == (couter - 1) / 2)
moreAsterisks = false;
for (int i = 0; i < nSpaces; i++)
Console.Write(" ");
for (int i = 0; i < nAsterisks; i++)
Console.Write("*");
for (int i = 0; i < nSpaces; i++)
Console.Write(" ");
Console.WriteLine();
}
}
private static void PrintHourGlass(int couter)
{
bool moreAsterisks = false;
for (int row = 0; row < couter - 1; row++)
{
int nAsterisks = moreAsterisks ? couter - 2 * (couter - row - 2) : couter - (2 * row);
int nSpaces = (couter - nAsterisks) / 2;
if (row == (couter - 2) / 2)
moreAsterisks = true;
for (int i = 0; i < nSpaces; i++)
Console.Write(" ");
for (int i = 0; i < nAsterisks; i++)
Console.Write("*");
for (int i = 0; i < nSpaces; i++)
Console.Write(" ");
Console.WriteLine();
}
}
P.S.:
it works with any number, not just 4-5...
Here's a minified LINQ solution for your problem:
class Program
{
static void Main(string[] args)
{
Console.Write("input: ");
string line = Console.ReadLine();
int n;
if (!int.TryParse(line, out n))
{
Console.WriteLine("Enter a valid integer number.");
return;
}
for (int i = 0; i < n; i++)
{
int l = Math.Abs(n - i * 2 - 1) + 1;
if (n % 2 != 0) l = n - l + 1;
Console.Write(Enumerable.Repeat(" ", n - l).DefaultIfEmpty("").Aggregate((a, b) => a + b));
Console.WriteLine(Enumerable.Repeat("* ", l).DefaultIfEmpty("").Aggregate((a, b) => a + b));
}
}
}
It's pretty simple; inside the loop, first line calculates length of the i-th diamond row if input is even, second one corrects the calculation for odd input. The remaining two lines print i-th row using some LINQ tricks. If you don't like showing off with LINQ, you can replace thoose lines with regular for loops (which is probably going to be faster). Then the code would look like:
class Program
{
static void Main(string[] args)
{
Console.Write("input: ");
string line = Console.ReadLine();
int n;
if (!int.TryParse(line, out n))
{
Console.WriteLine("Enter a valid integer number.");
return;
}
for (int i = 0; i < n; i++)
{
int l = Math.Abs(n - i * 2 - 1) + 1;
if (n % 2 != 0) l = n - l + 1;
//Console.Write(Enumerable.Repeat(" ", n - l).DefaultIfEmpty("").Aggregate((a, b) => a + b));
//Console.WriteLine(Enumerable.Repeat("* ", l).DefaultIfEmpty("").Aggregate((a, b) => a + b));
for (int c = 0; c < n - l; c++) Console.Write(" ");
for (int c = 0; c < l; c++) Console.Write("* ");
Console.WriteLine();
}
}
}