Our webservice uses the Datetime.parse method to convert data from an xml to DateTime format. It parses Date and time strings separately and adds it together like this -
DateTime.Parse(Date_string).add(TimeSpan.Parse(Time_string)).
Code was working fine except for a few hours last week. Time was showing as 12 hours ahead of actual time. For example, 01/01/2011 10:00:00 will be parsed as 01/01/2011 22:00:00. Most of the requests during that time were processed with datetime values 12 hours ahead of actual time though some were processed correctly. It is working fine now and haven't seen it after that.
Has anyone seen a issue like this?
You say "Code was working fine except for a few hours last week", but you didn't specify exactly when that was or what time zone you are in. Any chance it was around a daylight savings time change?
You shouldn't use TimeSpan.Parse at all. A TimeSpan does NOT represent the time-of-day, despite its appearance as hh:mm:ss. A TimeSpan represents a fixed DURATION of time.
If you really are given separate date and time strings, join them together before parsing, such as:
DateTime dt = DateTime.Parse(date_string + " " + time_string);
You should also be aware of the timezone implications of the string you are sending in. See the MSDN article on DateTime.Parse for further details.
Related
I'm working on a C# application, where I'm doing some things and I want to display both the start, intermediate and end timestamps, and now I would like to add their time differences.
I figured it would be easy:
Console.WriteLine($"Start time: {DT_Start.ToString("yyyy-MM-dd HH:mm:ss.fff")}");
Console.WriteLine($"Intermediate time: {DT_Intermediate.ToString("yyyy-MM-dd HH:mm:ss.fff")}");
Console.WriteLine($"End time: {DT_End.ToString("yyyy-MM-dd HH:mm:ss.fff")}");
This is working great. So I thought it would be equally easy to show the differences, so I started with:
Console.WriteLine($"Elapsed times: [{(DT_Intermediate - DT_Start).ToString("HH:mm:ss.fff")}] " +
$"and [{(DT_End - DT_Intermediate).ToString("HH:mm:ss.fff")}]");
I had dropped the year, month and day because everything is done in the same day. This did not work, so I decided to add those entries, but it still does not work:
Console.WriteLine($"Elapsed times: [{(DT_Intermediate - DT_Start).ToString("yyyy-MM-dd HH:mm:ss.fff")}] " +
$"and [{(DT_End - DT_Intermediate).ToString("yyyy-MM-dd HH:mm:ss.fff")}]");
So, in C#, you can show datetime objects and you can subtract them. The results, when debugging, are very similar but if you try to show that information in the same way, you get the error message System.FormatException: 'Input string was not in the correct format.'.
Is there a format I can use for both DateTime and TimeSpan objects? (I've seen that the difference between two DateTime objects would be a TimeSpan object)
As you have discovered yourself, the difference between two DateTime objects is a TimeSpan which just represents the difference of time that has passed. Since a TimeSpan is not linked to a calendar date, you cannot format it using calendar specific things like months and years.
However, your initial approach of only showing hours, minutes and seconds does work just fine. However, you will need to escape the colon and dot when wanting to use it in a TimeSpan format string. And also, the HH for the hours in the DateTime is written as lower-case hh for TimeSpan:
Console.WriteLine((DT_Intermediate - DT_Start).ToString("hh\\:mm\\:ss\\.fff"));
// ^^^^ ^^ ^^
// lower-case hh and escaped characters
So in your example, this should work:
Console.WriteLine($"Elapsed times: [{(DT_Intermediate - DT_Start).ToString("hh\\:mm\\:ss\\.fff")}] " +
$"and [{(DT_End - DT_Intermediate).ToString("hh\\:mm\\:ss\\.fff")}]");
Note that the TimeSpan also supports days as part of the difference, so if the number of hours in your difference surpasses 24, you will be missing this difference until you also include the number of days using the format specifier d in your result.
You can read more about formatting TimeSpan in the documentation about custom format strings.
You can use the DateTime.Subtract Method, it accepts DateTime and TimeSpan Object input.
https://learn.microsoft.com/de-de/dotnet/api/system.datetime.subtract?view=net-7.0
I am storing date and time separately from Angular to C#. While storing in database, I combine start date and start time field in C# and store it in dAtabase UTC like this: "2020-02-28T22:30:30Z".
While returning from c#, i create a new DateTime with start date and start time and return as one variable. However, if the date is 28/02/2020 and time is 4.00 am, with timezoneoffset of 5.30 India, the date gets rendered to 29/02/2020 4.00 am.
Is it possible to get date and time in Angular and render it separately as string etc.
Thanks
In JavaScript Date is a timestamp, counts the number of miliseconds since January 1, 1970 00:00 UTC. So you might be having a problem with timezones. Check this answer I gave a couple of weeks ago, it may guide you. I also add a function to solve it and some references there, Subtract day in conversion between Moment and LocalDate.
angular set timezone based on user browser timezone so you can change datetimes to another timezone. please read it How to convert Date in angular to another time zone
We are developing a C# application for a web-service client. This will run on Windows XP PC's.
One of the fields returned by the web service is a DateTime field. The server returns a field in GMT format i.e. with a "Z" at the end.
However, we found that .NET seems to do some kind of implicit conversion and the time was always 12 hours out.
The following code sample resolves this to some extent in that the 12 hour difference has gone but it makes no allowance for NZ daylight saving.
CultureInfo ci = new CultureInfo("en-NZ");
string date = "Web service date".ToString("R", ci);
DateTime convertedDate = DateTime.Parse(date);
As per this date site:
UTC/GMT Offset
Standard time zone: UTC/GMT +12 hours
Daylight saving time: +1 hour
Current time zone offset: UTC/GMT +13 hours
How do we adjust for the extra hour? Can this be done programmatically or is this some kind of setting on the PC's?
For strings such as 2012-09-19 01:27:30.000, DateTime.Parse cannot tell what time zone the date and time are from.
DateTime has a Kind property, which can have one of three time zone options:
Unspecified
Local
Utc
NOTE If you are wishing to represent a date/time other than UTC or your local time zone, then you should use DateTimeOffset.
So for the code in your question:
DateTime convertedDate = DateTime.Parse(dateStr);
var kind = convertedDate.Kind; // will equal DateTimeKind.Unspecified
You say you know what kind it is, so tell it.
DateTime convertedDate = DateTime.SpecifyKind(
DateTime.Parse(dateStr),
DateTimeKind.Utc);
var kind = convertedDate.Kind; // will equal DateTimeKind.Utc
Now, once the system knows its in UTC time, you can just call ToLocalTime:
DateTime dt = convertedDate.ToLocalTime();
This will give you the result you require.
I'd look into using the System.TimeZoneInfo class if you are in .NET 3.5. See http://msdn.microsoft.com/en-us/library/system.timezoneinfo.aspx. This should take into account the daylight savings changes correctly.
// Coordinated Universal Time string from
// DateTime.Now.ToUniversalTime().ToString("u");
string date = "2009-02-25 16:13:00Z";
// Local .NET timeZone.
DateTime localDateTime = DateTime.Parse(date);
DateTime utcDateTime = localDateTime.ToUniversalTime();
// ID from:
// "HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Time Zone"
// See http://msdn.microsoft.com/en-us/library/system.timezoneinfo.id.aspx
string nzTimeZoneKey = "New Zealand Standard Time";
TimeZoneInfo nzTimeZone = TimeZoneInfo.FindSystemTimeZoneById(nzTimeZoneKey);
DateTime nzDateTime = TimeZoneInfo.ConvertTimeFromUtc(utcDateTime, nzTimeZone);
TimeZone.CurrentTimeZone.ToLocalTime(date);
DateTime objects have the Kind of Unspecified by default, which for the purposes of ToLocalTime is assumed to be UTC.
To get the local time of an Unspecified DateTime object, you therefore just need to do this:
convertedDate.ToLocalTime();
The step of changing the Kind of the DateTime from Unspecified to UTC is unnecessary. Unspecified is assumed to be UTC for the purposes of ToLocalTime: http://msdn.microsoft.com/en-us/library/system.datetime.tolocaltime.aspx
I know this is an older question, but I ran into a similar situation, and I wanted to share what I had found for future searchers, possibly including myself :).
DateTime.Parse() can be tricky -- see here for example.
If the DateTime is coming from a Web service or some other source with a known format, you might want to consider something like
DateTime.ParseExact(dateString,
"MM/dd/yyyy HH:mm:ss",
CultureInfo.InvariantCulture,
DateTimeStyles.AssumeUniversal | DateTimeStyles.AdjustToUniversal)
or, even better,
DateTime.TryParseExact(...)
The AssumeUniversal flag tells the parser that the date/time is already UTC; the combination of AssumeUniversal and AdjustToUniversal tells it not to convert the result to "local" time, which it will try to do by default. (I personally try to deal exclusively with UTC in the business / application / service layer(s) anyway. But bypassing the conversion to local time also speeds things up -- by 50% or more in my tests, see below.)
Here's what we were doing before:
DateTime.Parse(dateString, new CultureInfo("en-US"))
We had profiled the app and found that the DateTime.Parse represented a significant percentage of CPU usage. (Incidentally, the CultureInfo constructor was not a significant contributor to CPU usage.)
So I set up a console app to parse a date/time string 10000 times in a variety of ways. Bottom line:
Parse() 10 sec
ParseExact() (converting to local) 20-45 ms
ParseExact() (not converting to local) 10-15 ms
... and yes, the results for Parse() are in seconds, whereas the others are in milliseconds.
I'd just like to add a general note of caution.
If all you are doing is getting the current time from the computer's internal clock to put a date/time on the display or a report, then all is well. But if you are saving the date/time information for later reference or are computing date/times, beware!
Let's say you determine that a cruise ship arrived in Honolulu on 20 Dec 2007 at 15:00 UTC. And you want to know what local time that was.
1. There are probably at least three 'locals' involved. Local may mean Honolulu, or it may mean where your computer is located, or it may mean the location where your customer is located.
2. If you use the built-in functions to do the conversion, it will probably be wrong. This is because daylight savings time is (probably) currently in effect on your computer, but was NOT in effect in December. But Windows does not know this... all it has is one flag to determine if daylight savings time is currently in effect. And if it is currently in effect, then it will happily add an hour even to a date in December.
3. Daylight savings time is implemented differently (or not at all) in various political subdivisions. Don't think that just because your country changes on a specific date, that other countries will too.
#TimeZoneInfo.ConvertTimeFromUtc(timeUtc, TimeZoneInfo.Local)
Don't forget if you already have a DateTime object and are not sure if it's UTC or Local, it's easy enough to use the methods on the object directly:
DateTime convertedDate = DateTime.Parse(date);
DateTime localDate = convertedDate.ToLocalTime();
How do we adjust for the extra hour?
Unless specified .net will use the local pc settings. I'd have a read of: http://msdn.microsoft.com/en-us/library/system.globalization.daylighttime.aspx
By the looks the code might look something like:
DaylightTime daylight = TimeZone.CurrentTimeZone.GetDaylightChanges( year );
And as mentioned above double check what timezone setting your server is on. There are articles on the net for how to safely affect the changes in IIS.
In answer to Dana's suggestion:
The code sample now looks like:
string date = "Web service date"..ToString("R", ci);
DateTime convertedDate = DateTime.Parse(date);
DateTime dt = TimeZone.CurrentTimeZone.ToLocalTime(convertedDate);
The original date was 20/08/08; the kind was UTC.
Both "convertedDate" and "dt" are the same:
21/08/08 10:00:26; the kind was local
I had the problem with it being in a data set being pushed across the wire (webservice to client) that it would automatically change because the DataColumn's DateType field was set to local. Make sure you check what the DateType is if your pushing DataSets across.
If you don't want it to change, set it to Unspecified
I came across this question as I was having a problem with the UTC dates you get back through the twitter API (created_at field on a status); I need to convert them to DateTime. None of the answers/ code samples in the answers on this page were sufficient to stop me getting a "String was not recognized as a valid DateTime" error (but it's the closest I have got to finding the correct answer on SO)
Posting this link here in case this helps someone else - the answer I needed was found on this blog post: http://www.wduffy.co.uk/blog/parsing-dates-when-aspnets-datetimeparse-doesnt-work/ - basically use DateTime.ParseExact with a format string instead of DateTime.Parse
This code block uses universal time to convert current DateTime object then converts it back to local DateTime. Works perfect for me I hope it helps!
CreatedDate.ToUniversalTime().ToLocalTime();
I have one issue which I resolved by myself but yet need some confirming words whether I am 100% correct on my thought, just because there is not any documentation I found to prove myself correct.
My server is in DST time currently, CRM UI is also showing 1 hour up then data stored in db. that's fine.
When I calculate and store date with plugin, after my plugin update operation finishes, CRM platform deducts 1 hour from data I saved. I have read that when we do some operation via SDK related date time, CRM stores date time as it is. is it the case that when time is in DST, platform also get involves to deduct 1 hour by then ?
As a resolution, I have commented out my line of deducting 1 hour and letting CRM to do it now.
Am I correct on my understanding or it would be appreciable if some one can provide any documentation URL.
Any time you're working in the SDK, DateTimes are retrieved and stored as UTC. The CRM web platform will convert the UTC time into the user's time. You shouldn't need to be doing any Conversions of time, just using UTC.
Let's assume your local time is UTC -1 (with DST since UTC doesn't observe it). So if UTC is 14:00, your local time is 13:00.
Let's also assume your plugin in going to populate a date attribute on the entity that is for the current time, tomorrow. If your code looks like this:
entity.new_SomeDate = DateTime.Now.AddDays(1);
service.Update(entity);
Assuming DateTime.Now is 13:00, it'll store 13:00 in the database (as if it was UTC). Then when you go to look at the time value from the CRM website, since you're UTC - 1 it'll display 12:00, even though you wanted 13:00.
Now if your code looks like this:
entity.new_SomeDate = DateTime.UtcNow.AddDays(1);
service.Update(entity);
Assuming DateTime.Now is 13:00, it'll store 14:00 in the database since DateTime.UtcNow is 14:00. Then when you go to look at the time value from the CRM website, since you're UTC - 1 it'll display 13:00, since it'll take the UTC value - 1.
Now if your code looks like this:
entity.new_SomeDate = entity.new_UserEnteredDateFromCrm.AddDays(1);
service.Update(entity);
The new_UserEnteredDateFromCrm will already have been converted from the users' Time Zone to UTC and it'll work as expected.
This makes DateTimes that you would prefer to store as Dates very difficult though (birthdays anyone?) and you may have to think through it a little more in depth.
I've figured it out myself. that date has component in it which explores what kind of date time is it in. it can be either Utc, Local or Unspecified.
when you pass any date to CRM attribute via code. make sure that date time kind is Utc, otherwise CRM service internal operation will convert it to be into Utc.
In my case, I was stucked to this because when I read date from CRM, I had to set office start in that date. e.g. I needed to make 03/02/2014 12:00 to 03/02/2014 8:30 to make incoming date aligned with office start time. I was doing operation like,
DateTime InDate = Case.CreatedOn.Value;
DateTime Dt = new DateTime(InDate.Year,InDate.Month,InDate.Day,8,30,0)
Having InDate in Utc Time, I was creating new date object so it lost DateTime kind from Utc to Local ( having in DST it signifies to be 1 hour up)
to avoid, always set DateTime kind to be exactly as provided In date to new object. e.g. above operation can be done alternatively like.
DateTime InDate = Case.CreatedOn.Value;
DateTime Dt = new DateTime(InDate.Year,InDate.Month,InDate.Day,8,30,0)
Dt = DateTime.SpecifyKind(Dt,DateTimeKind.Utc)
Hope that Helps.
I've string (variable is fileDate) with Date values in the following format:
2/12/2011 11:58 AM
Now I want to convert this to a date and then to UTC time based as I've problems in comparing dates in different machines, so *I always want to convert all strings (which are getting compared) to Utc_date values.*
I tried this code below but it did not work as I'm not able to convert the above string to Datetime based (as it does not have seconds).
DateTime date = Convert.ToDateTime(fileDate);
date = DateTime.SpecifyKind(date, DateTimeKind.Utc);
fileDate = date.ToString("MM/dd/yyyy hh:mm tt");
Above did not work showing FormatException.
Can you pl help?
To start with, I'd suggest using DateTime.ParseExact or TryParseExact - it's not clear to me whether your sample is meant to be December 2nd or February 12th. Specifying the format may well remove your FormatException.
The next problem is working out which time zone you want to convert it with - are you saying that 11:58 is a local time in some time zone, or it's already a UTC time?
If it's a local time in the time zone of the code which is running this, you can use DateTimeStyles.AssumeLocal | DateTimeStyles.AdjustToUniversal to do it as part of parsing.
If it's already a universal time, use DateTimeStyles.AssumeUniversal
If it's a local time in a different time zone, you'll need to use TimeZoneInfo to perform the conversion.
Also, if it's a local time you'll need to consider two corner cases (assuming you're using a time zone which observes daylight saving time):
A local time may be skipped due to DST transitions, when the clocks go forward. So if the clocks skip from 1am to 2am, then 1:30am doesn't exist at all.
A local time may be ambiguous due to DST transitions, when the clocks go back. So if the clocks go back from 2am to 1am, then 1:30am occurs twice at different UTC times - which occurrence are you interested in?
You should decide how you want to handle these cases, and make sure they're covered in your unit tests.
Another option is to use my date and time library, Noda Time, which separates the concepts of "local date/time" and "date/time in a particular time zone" (and others) more explicitly.
you should be using DateTime.ParseExact to get the value into a proper DateTime instance, and then you can use .ToUniversalTime() to get the UTC time (this would be with respect to the difference of time as in your server machine)
you can use :
DateTime.Now.ToUniversalTime();
i don't mean to say to you should use "DateTime.Now" but you get the point that as a part of the DateTime object you have a method to transform it to Universal time
http://msdn.microsoft.com/en-us/library/system.datetime.touniversaltime.aspx