I have a WinForm set up and a process that loops until a button is pressed on the form.
When I try to run my code, the form does not even display. I suspect this is because the code gets stuck in the loop and doesn't get far enough to display the WinForm. How can I get the form to display and the loop to run after that point?
If you're looping because you need to do something with the GUI periodically while waiting for input, I suggest using a Timer control and its Tick event.
If you want to do non-GUI things while waiting, a more traditional timer is better suited to the task,
You should probably run the loop in a background thread. The BackgroundWorker class makes this pretty easy to do.
Don't do that.
Windows Forms (like most modern user interface development toolkits) is an event-driven framework. You should never use a loop that "waits" for something to happen; instead you want to use an event that triggers something to happen.
Essentially what's happening is this: WinForms has a loop running a message pump that listens for events from Windows and triggers C# events in response to them. Your code is executing on the same thread as that message pump (it has to, since in WinForms only one thread is allowed to touch any given control). So if you put that thread into a loop, the WinForms code that should be pumping messages isn't, and your user interface appears to hang, since it isn't responding to any messages from Windows. (If you keep clicking it, you will fill up the message queue and get a dialog box that says "This application has stopped responding, do you want to terminate?" or something like that.)
The correct solution is to do one of the following:
Use a Timer
Use a BackgroundWorker
Use a ThreadPool
Another solution that would work, but is not a good idea is:
Use Application.DoEvents() -- but please don't actually do this
Your form loading is freezing because the UI of a windows form runs in a single thread. And the logic that you put on the Load event of this form is running on that thread.
You can run your loop on a separate thread easily by using a BackgroundWorker component on your windows form. On the event DoWork of your background worker, you place the code that has the loop that should run without block your UI. On the Form.Load event, you can start the background worker component by calling the method RunWorkerAsync. On the event handler of your button, you place a code to stop the background worker by calling CancelAsync method.
The article How to: Implement a Form That Uses a Background Operation shows exactly how to accomplish it.
About your comment on not being able to update the Text of a TextBox from a your background worker component. It happens because it is not allowed to modify the state of a windows forms control from a different thread (your background worker code is running on a separated thread) MSDN documentation says:
Access to Windows Forms controls is not inherently thread safe. If you have two or more threads manipulating the state of a control, it is possible to force the control into an inconsistent state. Other thread-related bugs are possible, such as race conditions and deadlocks. It is important to make sure that access to your controls is performed in a thread-safe way.
A sample of how you can update the state of your windows forms controls from your background thread will be similar to the one below (assuming that the new value is already stored on a String variable named text):
// InvokeRequired required compares the thread ID of the
// calling thread to the thread ID of the creating thread.
// If these threads are different, it returns true.
if (this.textBox1.InvokeRequired)
{
SetTextCallback d = new SetTextCallback(SetText);
this.Invoke(d, new object[] { text });
}
else
{
this.textBox1.Text = text;
}
I borrowed this code snipped from How to: Make Thread-Safe Calls to Windows Forms Controls article. It can provide you more information about how to deal with multi-threaded windows forms.
You can use the form load event to trigger the start of the loop.
So it would handle the event Me.Load
However is it necessary for your loop to be happening inside of the UI?
This happens because your loop is keeping the window function from processing messages, such as those that tell it to repaint itself. Place a call to Application.DoEvents() inside of your loop to allow the UI to continue to function.
However, you need to ask yourself why you're looping like this in the first place. If you're, say, copying a bunch of files, this might make sense. For most tasks, though, responding to a timer tick should do the trick and won't block the UI.
You should run your loop in a background thread using the BackgroundWorker component.
Remember that the background thread cannot directly interact with the UI controls.
To report the progress on the UI, you should call the BackgroundWorker's ReportProgress method in the background thread, and handle the ProgressChanged event to update the UI.
You can call the CancelAsync method when the Button is clicked, and loop until the CancellationPending property is true.
Related
I'm working on a Windows Phone App.
I have a very performance intensive method which takes several seconds until the operation is done.
When the method is called I want to show an animated loading symbol which is defined in the xaml of my view. When the operation is finished it should disappear. I set the loading symbol to visible in the first line of this method.In the last line I set the visibility to collapsed.
The problem is that at first the whole code behind will be executed. Unfortunately nothing is to be seen, because the the visibiliy is set to visible after the code behind operations are executed and in the same moment its set to collapsed.
Has anybody an idea how to solve this problem? Thanks so much in advance.
The problem you have is that you're calling your method on the main (UI) thread. This means that your method blocks the UI from refreshing, and also means that (as you noted) by the time the UI does refresh, you've already hidden the icon again.
What you need to do instead is call your method on a background thread (there are a number of ways to handle this). You will need to push the UI update to the UI thread (using Dispatcher.Invoke), but the rest of your method will run on a separate thread.
You'll also need to use a callback of some kind - maybe a custom event - so that your UI thread knows when the background thread is completed.
Without seeing the code its hard to say for sure but if you use the dispatcher to run you intensive code after the busy indicator is set this would allow the ui thread time to change before running the code.
An example
//This assumes you are binding in xaml to the isbusy and it implements INotifyPropertyChanged
IsBusy = true;
Dispatcher.BeginInvoke(()=>{ //...performance intense here
});
That being Said Dan Puzey is right. You should only run this logic on the UI thread if for some reason your need to. even then be wary of this as it makes for a poor ui experience.
One way you could accomplish this and still have your dispatcher fire off when you need would be to pass a copy of the dispatcher into the background.
ThreadPool.QueueUserWorkItem (d => {
//...performance intense here
Dispatcher dispatcher = d as Dispatcher;
if(dispatcher != null){
dispatcher.BeginInvoke()()=>{//...ui updates here }
}
}, Dispatcher.CurrentDispatcher);//make sure this is called from your UI thread or you may not end up with the correct dispatcher
I am trying to understand a certain longstanding concept in Windows Forms re: UI programming; following code is from Chris Sells' Windows Forms Programming book (2nd Ed., 2006):
void ShowProgress(string pi, int totalDigits, int digitsSoFar) {
// Display progress in UI
this.resultsTextBox.Text = pi;
this.calcToolStripProgressBar.Maximum = totalDigits;
this.calcToolStripProgressBar.Value = digitsSoFar;
if( digitsSoFar == totalDigits ) {
// Reset UI
this.calcToolStripStatusLabel.Text = "Ready";
this.calcToolStripProgressBar.Visible = false;
}
// Force UI update to reflect calculation progress
this.Refresh();
}
This method is part of small sample application that has another long-running method which calculates Pi. Each time a cluster of digits are calculated, ShowProgress() is called to update the UI. As explained in the book, this code is the "wrong" way of doing things, and causes the UI to freeze when the application is minimized and then brought into the foreground again, causing the system to ask the application to repaint itself.
What I don't understand: Since this.Refresh() is being called repeatedly, why doesn't it process any system repaint event that is waiting for attention?
And a follow-up question: When I add Application.DoEvents() immediately following this.Refresh(), the freeze-up problem disappears. This is without having to resort to Invoke/BeginInvoke, etc. Any comments?
Basically, the reason for this is the way Windows handles messages - it does this in a synchronous way in an internal message loop.
The point is that there was a message that triggered your code. For example a button click. Your application is in the middle of handling the message. From within this handler, you force the refresh which puts another WM_PAINT in the message queue. When your handler finishes, the message loop will surely pick it up and dispatch, thus repainting the control. But your code is not finished, in fact it loops calling your ShowProgress, causing WM_PAINT being queued forever.
On the other hand, the DoEvents() causes an independent instance of the message loop to fire. It's fired from within your code which means that the call stack looks like this:
outer message loop -> your code -> inner message loop.
The inner message loop processes all pending messages, including the WM_PAINT (thus the control is redrawn) but it is dangerous - as it will dispatch all other pending messages, including button clicks, menu clicks or event closing your application with the X at the top-right corner. Unfortunately, there's no easy way to make the loop to process the WM_PAINT only which means that calling DoEvents() exposes your application to subtle potential problems involving unexpected user activity during the execution of your code which triggers the DoEvents.
Form1.button_Click(...) {
// Show a dialog form, which runs a method <CheckBalance()> on it's OnLoad Event.
var modemDialog = new ModemDialog("COM25");
modemDialog.ShowDialog();
// the user can't see this dialog form until the method <CheckBalance()> terminates.
}
Is it possible to show first the dialog then run the specified method?
THanks.
That is correct and expected. Winforms UI is inherently single-threaded. Having a function call like "CheckBalance" in the form load event will prevent the form from showing until the form load event completes. Depending on the duration of the task, you have a number of options available to you:
If it's a fast task, compute it ahead of time before showing the form
If it's something the user may want to initiate, move it to a button on the new form, so it's only calculated on the request of the user
If it's a long running task that takes some time, you'll need to move it off in to another thread. Using a BackgroundWorker is recommended.
OnLoad occurs before the form is shown to allow you to initialise the form and variables and what not, which means it is synchronous. The form will not show until you return from that function.
If you want to asynchronously run the CheckBalance() method, then you can use a few techniques, such as utilising the Threading, ThreadPool or Tasks API to shift that work to a background thread, and returning immediately so that the form is shown.
Here is an example of using a Task to perform the same action, but asynchronously so that the form immediately shows:
Action<object> action = () => { CheckBalance(); };
new Task(action).Start();
Please note that if you access the UI thread, you'll need to beware of thread-safety and invocation.
The simple way to make sure your form is visible before CheckBalance is run is to use this code in the form load handler:
this.BeginInvoke((Action)(() => this.CheckBalance()));
This will push the execution of the CheckBalance method onto the UI thread message pump so will execute after all preceding UI code is complete.
Others are correct though that the UI will still be blocked as CheckBalance executes. You probably want to run it on a background thread to prevent this.
Am relatively new to C# and coding in general. I am trying to write a program that has some logic and that also indicates progress with a progressbar. I am starting a thread in Main() that does all my business logic. It has events that are trigerred at points that I need the progress bar udpated.
The Form object subscribes to the business logic events and has thread safe delegates that are invoked to update the progress bars and text labels.
My problem is that, as the Form is started in the main thread, I have to start the business logic thread before Application.Run(). When the first ProgressUpdate event is trigerred, the Form object still does not exist. I guess a hacky way is to add Thread.Sleep(100) in the second thread, but I don't like that. How do I get around this? Am I on a completely incorrect track? (Am I even making sense?)
Form1 theForm = new Form1();
CreateReport theCreateReport = new CreateReport();
Thread t = new Thread(new ThreadStart(theCreateReport.DoProcess));
t.IsBackground = true;
theForm.Subscribe(theCreateReport);
t.Start();
Application.Run(theForm);
theForm is the form. theCreateReport is where my business logic starts.
You want to use one or more BackgroundWorker objects instead of your business logic thread. This will manage the threading for you as well as giving you a way to provide progress feedback to the main thread.
Maybe you should start your business logic in OnLoad event?
The Form already exists after you invoke the constructor (on the very first line) - it's just not visible yet. So you don't need to worry, everything is initialized when you start the new thread.
In Main, just create the form and Application.Run it. In the Load event of the form, start your thread.
You don't really gain any advantage from doing things the way you're currently doing them. And as you've already found, it creates a timing/sequence problem.
The best way to fix problems is to not have them in the first place.
I would use BackgroundWorker and you can still use your events and delegates with it. This time round you will be wrapping up and firing Background Worker's "ProgressChanged" and "RunWorkerCompleted" events.
And you Form can listen to these events and update ProgressBar accordingly.
BWorker handles switching to GUI Thread and Exception Handling better.
You can initialize BackgroundWorker on Form Load.
I've got a Windows Forms (C#) project with multiple comboboxes/listboxes etc that are populated when the form loads.
The problem is that the loading of the comboboxes/listboxes is slow, and since the loading is done when the form is trying to display the entire form isn't shown until all the controls have been populated. This can in some circumstances be 20+ seconds.
Had there been a Form_finished_loaded type of event I could have put my code in there, but I can't find an event that is fired after the form is done drawing the basic controls.
I have one requirement though - the loading has to be done in the main thread (since I get the items from a non-threading friendly COM-application).
I have found one potential solution, but perhaps there is a better way?
I can create a System.Timer.Timer when creating the form, and have the first Tick be called about 1 second later, and then populate the lists from that tick. That gives the form enough time to be displayed before it starts filling the lists.
Does anyone have any other tips on how to delay the loading of the controls?
There is the Shown event that "occurs whenever the form is first displayed.". Also you may want to use the BeginUpdate and EndUpdate functions to make the populating of your combobox faster.
It has that certain smell of workaround, but this approach should fulfil your needs:
private bool _hasInitialized = false;
private void Form1_Shown(object sender, EventArgs e)
{
if (!_hasInitialized)
{
ThreadPool.QueueUserWorkItem(state =>
{
Thread.Sleep(200); // brief sleep to allow the main thread
// to paint the form nicely
this.Invoke((Action)delegate { LoadData(); });
});
}
}
private void LoadData()
{
// do the data loading
_hasInitialized = true;
}
What it does is that it reacts when the form is shown, checks if it has already been initialized before, and if not it spawns a thread that will wait for a brief moment before calling the LoadData method on the main thread. This will allow for the form to get painted properly. The samething could perhaps be achieve by simply calling this.Refresh() but I like the idea of letting the system decide how to do the work.
I would still try to push the data loading onto a worker thread, invoking back on the main thread for populating the UI (if it is at all possible with the COM component).
Can you get your data from a web service that calls the COM component?
That way, you can display empty controls on a Locked form at the start, make Asynchronous calls to get the data, and on return populate the respective combos, and once all of them are loaded, you can unlock the form for the user to use.
You could listen for the VisibleChanged event and the first time it's value is true you put your initialization code.
Isn't FormShown the event you're looking for?
When you say that you cannot use a background thread because of COM what do you mean? I am using many COM components within my apps and running them on background threads.
If you create a new thread as an STAThread you can probably load the ComboBox/ListBox on a Non-UI thread. IIRC the ThreadPool allocates worker threads as MTAThread so you'll need to actually create a thread manually instead of using ThreadPool.QueueUserWorkItem.