Related
I am pretty new to OOP and looking into things in a bit more depth, but I have a bit of confusion between these 3 methods in C# and which one is best and what the differences are between 2 of them.
Example 1
So lets start with this one, which (so I understand) is the wrong way to do it:
public class MyClass
{
public string myAttribute;
}
and in this way I can set the attribute directly using:
myObject.myAttribute = "something";
Example 2
The next way I have seen and that seems to be recomended is this:
public class MyClass
{
public string myAttribute { get; set;}
}
With getters and setters, this where I dont understand the difference between the first 2 as the variable can still be set directly on the object?
Example 3
The third way, and the way that I understand the theory behind, is creating a set function
public class MyClass
{
string myAttribute;
public void setAttribute(string newSetting)
{
myAttribute = newSetting;
//obviously you can apply some logic in here to remove unwanted characters or validate etc.
}
}
So, what are the differences between the three? I assume example 1 is a big no-no so which is best out of 2 and 3, and why use one over the other?
Thanks
The second
public class MyClass
{
public string MyAttribute { get; set;}
}
is basically shorthand for:
public class MyClass
{
private string myPrivateAttribute;
public string MyAttribute
{
get {return myPrivateAttribute;}
set {myPrivateAttribute = value;}
}
}
That is an auto-implemented property, which is exactly the same as any regular property, you just do not have to implement it, when the compiler can do that for you.
So, what is a property? It's nothing more than a couple of methods, coupled with a name. I could do:
public class MyClass
{
private string myPrivateAttribute;
public string GetMyAttribute()
{
return myPrivateAttribute;
}
public void SetMyAttribute(string value)
{
myPrivateAttribute = value;
}
}
but then instead of writing
myClass.MyAttribute = "something";
string variable = myClass.MyAttribute;
I would have to use the more verbose, but not necessarily clearer form:
myClass.SetMyAttribute("something");
string variable = myClass.GetMyAttribute();
Note that nothing constraints the contents of the get and set methods (accessors in C# terminology), they are methods, just like any other. You can add as much or as little logic as you need inside them. I.e. it is useful to make a prototype with auto-implemented properties, and later to add any necessary logic (e.g. log property access, or add lazy initalization) with an explicit implementation.
What your asking here has to do with encapsulation in OOP languages.
The difference between them is in the way you can access the propriety of an object after you created an object from your class.
In the fist example you can access it directly new MyClass().MyAttribute whether you get or set it's value.
In the second example you declare 2 basic functions for accessing it:
public string MyAttribute
{
get {return myPrivateAttribute;}
set {myPrivateAttribute = value;}
}
In the third example you declare your own method for setting the value. This is useful if you want to customize the setter. For example you don't want to set the value passed, but the value multiplied by 2 or something else...
I recommend some reading. You can find something here and here.
Property is a syntactic sugar over private attribute with get and set methods and it's realy helpful and fast to type;
You may treat automatic property with { get; set;} as a public attribute. It has no additional logic but you may add it later without uset ever notice it.
Just exchange
public string MyLine { get; set;}
to
string myLine;
public string MyLine
{
get { return myLine; }
set { myLine = value + Environment.NewLine; }
}
for example if you need so.
You can also easily create read only property as { get; private set }.
So use Properties instead of public attributes every time just because its easier and faster to write and it's provides better encapsulation because user should not be used get and set methods if you decide to use it in new version of yours programm.
One of the main principles of OOP is encapsulation, and this is essentially the difference between the first example and the other 2.
The first example you have a private field which is exposed directly from the object - this is bad because you are allowing mutation of internal data from outside the object and therefore have no control over it.
The other 2 examples are syntactically equivalent, the second being recommended simply because it's less code to write. However, more importantly they both restrict access & control mutation of the internal data so give you complete control over how the data should be managed - this is ecapsulation.
Bit of an odd one this...
Lets say I have the following class:
public class Wibble
{
public string Foo {get;set;}
public string Bar {get;set;}
}
This class is used a process where the values of Foo and Bar are updated/changed. However after a certain point in the process I want to "lock" the instance to prevent any changes from being made. So the question is how best to do this?
A solution of sorts would be something like this:
public class Wibble
{
private string _foo;
private string _bar;
public bool Locked {get; set;}
public string Foo
{
get
{
return this._foo
}
set
{
if (this.Locked)
{
throw new ObjectIsLockedException()
}
this._foo = value;
}
}
public string Bar
{
get
{
return this._bar
}
set
{
if (this.Locked)
{
throw new ObjectIsLockedException()
}
this._bar = value;
}
}
}
However this seems a little inelegant.
The reason for wanting to do this is that I have an application framework that uses externally developed plugins that use the class. The Wibble class is passed into the plugins however some of them should never change the contents, some of them can. The intention behind this is to catch development integration issues rather than runtime production issues. Having the object "locked" allows is to quickly identify plugins that are not coded as specified.
I've implemented something similar to your locked pattern, but also with a read-only interface implemented by a private sub-class containing the actual class data, so that you could pass out what is clearly a read-only view of the data and which can't be up-casted to the original 'mutable version'. The locking was purely to prevent the data provider from making further changes after it had provided an immutable view.
It worked reasonably well, but was a bit awkward, as you've noted. I think it's actually cleaner to have mutable 'Builder' objects which can then generate immutable snapshots. Think StringBuilder and String. This means you duplicate some property code and have to write the routines to do the copying, but it's less awkward, in my opinion, than having a write-lock on every property. It's also evident at compile-time that the snapshot is supposed to be read-only and the user of the Builder cannot modify the snapshots that it created earlier.
I would recommend this:
An immutable base class:
public class Wibble
{
public string Foo { get; private set; }
public string Bar { get; private set; }
public Wibble(string foo, string bar)
{
this.Foo = foo;
this.Bar = bar
}
}
Then a mutable class which you can change, and then create an immutable copy when the time comes.
public class MutableWibble
{
public string Foo { get; set; }
public string Bar { get; set; }
public Wibble CreateImmutableWibble()
{
return new Wibble(this.Foo, this.Bar);
}
}
I can't remember the C# syntax exactly, but you get the idea.
Further reading: http://msdn.microsoft.com/en-us/library/acdd6hb7%28v=vs.71%29.aspx
You cannot make an object immutable!
You can follow this post:
How do I create an immutable Class?
But I think you can always change property values by reflection!
update
"...Actually, string objects are not that
immutable and as far as I know there are at least 2 ways to break string
immutability. With pointers as shown by this code example and with some advanced System.Reflection usage...."
http://codebetter.com/patricksmacchia/2008/01/13/immutable-types-understand-them-and-use-them/
The other option you have is use the BinaryFormatter to create a memberwise clone of the object to be "locked". Though you're not locking the object you're creating a snapshot which can be discarded while the original remains unchanged.
One of the most important aspects of OOP is data hiding. Can somebody explain using a simple piece of code what data hiding is exactly and why we need it?
Data or Information Hiding is a design principal proposed by David Paranas.
It says that you should hide the
design decisions in one part of the
program that are likely to be changed
from other parts of the program, there
by protecting the other parts from
being affected by the changes in the
first part.
Encapsulation is programming language feature which enables data hiding.
However note that you can do data\information hiding even without encapsulation. For example using modules or functions in non Object Oriented programming languages. Thus encapsulation is not data hiding but only a means of achieving it.
While doing encapsulation if you ignore the underlying principal then you will not have a good design. For example consider this class -
public class ActionHistory
{
private string[] _actionHistory;
public string[] HistoryItems
{
get{return _actionHistory; }
set{ _actionHistory = value; }
}
}
This calls encapsulates an array. But it does not hide the design decision of using a string[] as an internal storage. If we want to change the internal storage later on it will affect the code using this class as well.
Better design would be -
public class ActionHistory
{
private string[] _actionHistory;
public IEnumerable<string> HistoryItems
{
get{return _actionHistory; }
}
}
I'm guessing by data hiding you mean something like encapsulation or having a variable within an object and only exposing it by get and modify methods, usually when you want to enforce some logic to do with setting a value?
public class Customer
{
private decimal _accountBalance;
public decimal GetBalance()
{
return _accountBalance;
}
public void AddCharge(decimal charge)
{
_accountBalance += charge;
if (_accountBalance < 0)
{
throw new ArgumentException(
"The charge cannot put the customer in credit");
}
}
}
I.e. in this example, I'm allowing the consuming class to get the balance of the Customer, but I'm not allowing them to set it directly. However I've exposed a method that allows me to modify the _accountBalance within the class instance by adding to it via a charge in an AddCharge method.
Here's an article you may find useful.
Information hiding (or more accurately encapsulation) is the practice of restricting direct access to your information on a class. We use getters/setters or more advanced constructs in C# called properties.
This lets us govern how the data is accessed, so we can sanitize inputs and format outputs later if it's required.
The idea is on any public interface, we cannot trust the calling body to do the right thing, so if you make sure it can ONLY do the right thing, you'll have less problems.
Example:
public class InformationHiding
{
private string _name;
public string Name
{
get { return _name; }
set { _name = value; }
}
/// This example ensures you can't have a negative age
/// as this would probably mess up logic somewhere in
/// this class.
private int _age;
public int Age
{
get { return _age; }
set { if (value < 0) { _age = 0; } else { _age = value; } }
}
}
Imagine that the users of your class are trying to come up with ways to make your class no longer fulfill its contract. For instance, your Banking object may have a contract that ensures that all Transactions are recorded in a log. Suppose mutation of the Bank's TransactionLog were publically accessible; now a consuming class could initiate suspect transactions and modify the log to remove the records.
This is an extreme example, but the basic principles remain the same. It's up to the class author to maintain the contractual obligations of the class and this means you either need to have weak contractual obligations (reducing the usefulness of your class) or you need to be very careful about how your state can be mutated.
What is data hiding?
Here's an example:
public class Vehicle
{
private bool isEngineStarted;
private void StartEngine()
{
// Code here.
this.isEngineStarted = true;
}
public void GoToLocation(Location location)
{
if (!this.isEngineStarted)
{
this.StartEngine();
}
// Code here: move to a new location.
}
}
As you see, the isEngineStarted field is private, ie. accessible from the class itself. In fact, when calling an object of type Vehicle, we do need to move the vehicle to a location, but don't need to know how this will be done. For example, it doesn't matter, for the caller object, if the engine is started or not: if it's not, it's to the Vehicle object to start it before moving to a location.
Why do we need this?
Mostly to make the code easier to read and to use. Classes may have dozens or hundreds of fields and properties that are used only by them. Exposing all those fields and properties to the outside world will be confusing.
Another reason is that it is easier to control a state of a private field/property. For example, in the sample code above, imagine StartEngine is performing some tasks, then assigning true to this.isEngineStarted. If isEngineStarted is public, another class would be able to set it to true, without performing tasks made by StartEngine. In this case, the value of isEngineStarted will be unreliable.
Data Hiding is defined as hiding a base class method in a derived class by naming the new class method the same name as the base class method.
class Person
{
public string AnswerGreeting()
{
return "Hi, I'm doing well. And you?";
}
}
class Employee : Person
{
new public string AnswerGreeting()
{
"Hi, and welcome to our resort.";
}
}
In this c# code, the new keyword prevents the compiler from giving a warning that the base class implementation of AnswerGreeting is being hidden by the implementation of a method with the same name in the derived class. Also known as "data hiding by inheritance".
By data hiding you are presumably referring to encapsulation. Encapsulation is defined by wikipedia as follows:
Encapsulation conceals the functional
details of a class from objects that
send messages to it.
To explain a bit further, when you design a class you can design public and private members. The class exposes its public members to other code in the program, but only the code written in the class can access the private members.
In this way a class exposes a public interface but can hide the implementation of that interface, which can include hiding how the data that the class holds is implemented.
Here is an example of a simple mathematical angle class that exposes values for both degrees and radians, but the actual storage format of the data is hidden and can be changed in the future without breaking the rest of the program.
public class Angle
{
private double _angleInDegrees;
public double Degrees
{
get
{
return _angleInDegrees;
}
set
{
_angleInDegrees = value;
}
}
public double Radians
{
get
{
return _angleInDegrees * PI / 180;
}
set
{
_angleInDegrees = value * 180 / PI;
}
}
}
I'm working on modeling a business domain object in a class and am wondering what would be the best way to properly encapsulate private fields that only apply to a few methods.
When I started, my code originally looked like this:
public class DiscountEngine
{
public Cart As Cart { get; set;}
public Discount As Discount { get; set;}
public void ApplySKUGroupDiscountToCart()
{
...
}
}
However, ApplySKUGroupDiscountToCart() was starting to get ugly, so I decided to refactor the code into smaller private methods that get called from ApplySKUGroupDiscountToCart(). I started by passing in lots of local variables into the helper method, but then decided to pull out variables common to both routines and make them private modular variables. The new code looks like this:
public class DiscountEngine
{
public Cart As Cart { get; set;}
public Discount As Discount { get; set;}
private int _SKUGroupItemDiscountsApplied = 0
private int _SKUGroupTotalDiscounts = 0
private int _SKUGroupID = 0
public void ApplySKUGroupDiscountToCart()
{
...
}
private void ApplyDiscountToSingleCartItem(ref CartItem cartI,
ref DiscountItem discountI)
{
...
}
}
On the one hand, the three private integer fields are useful for allowing the related methods to share common variables without needing to pass them back and forth as parameters. However, these variables are only applicable to these related methods and any other methods I might add would have no need to see them.
Is there a way to encapsulate the private fields and their related methods while still remaining a part of the DiscountEngine class? Is there a better way altogether of dealing with this problem?
Normally, making a class field private implies "I have enough discipline to ensure that this field is only used in an appropriate manner inside this class". If your class is too big for you to say that with confidence, then maybe the class is trying to do too many different things, and should be split up (see SRP).
Anyway, enough of the theory :-). If you want to stick with one class then you could always encapsulate those three fields into a private nested class, e.g.
public class DiscountEngine
{
public Cart As Cart { get; set;}
public Discount As Discount { get; set;}
private class SKUGroup
{
public int ItemDiscountsApplied = 0
public int TotalDiscounts = 0
public int ID = 0
}
public void ApplySKUGroupDiscountToCart()
{
...
}
private void ApplyDiscountToSingleCartItem(ref CartItem cartI,
ref DiscountItem discountI)
{
...
}
}
That gives you a bit more freedom to pass instances of the class around your code as method parameters.
You could take this a step further, and move any private methods that act on the SKU data into the nested class as well.
First things first, you very likely don't need to pass the parameters to ApplyDiscountToSingleCartItem as ref. Short version: unless you're actually assigning a value to the variable that you want to be visible to the calling code, you don't need ref. Modifying variable and property values on them will be visible to the calling code without passing them as ref.
Second, there is no way to scope a variable in between instance and local, which is what you're asking. The only way to accomplish this would be to refactor this functionality into another class (likely a nested private class).
Don't, however, use instance variables as a way to pass data between functions. If the data becomes "stale" after the function is called, then it should be a parameter, not an instance variable.
I would say the only other way that I can think of to handle this would be to extract all the methods and private variables that are associated with them into a separate class. That way you keep all that encapsulated. But not sure if that would make sense in the context of your domain objects.
You could always create a nested (inner) class to bundle together parameters that have a common use. In this way you could still pass them to your private methods without having to pass around l.ots of arguments - you'd just pass an instance of the private type.
"these variables are only applicable to these related methods and any other methods I might add would have no need to see them."
First of all, keep in mind that one of the first rules of OO development is to build what the customer wants THEN apply OO design like basic OO rules and patterns. Your quote verges on saying you want to plan for the unknown. Be careful that the unknown is "more of the same" not NEW requirements. Otherwise, this class is going to end up becoming a God Object.
If you find you have many members that aren't used by the methods, then divide and conquer.
Sometimes you have a private field that backs a property, you only ever want to set the field via the property setter so that additional processing can be done whenever the field changes. The problem is that it's still easy to accidentally bypass the property setter from within other methods of the same class and not notice that you've done so. Is there a way in C# to work around this or a general design principle to avoid it?
IMHO, it is not used, because:
The class must trust itself
If your class gets as large that one part does not know the other, it should be divided.
If the logic behind the property is slightly more complex, consider to encapsulate it in an own type.
I'd consider this a nasty hack and try to avoid it if possible, but...
You can mark the backing field as obsolete so that the compiler will generate a warning when you try to access it, and then suppress that warning for the property getter/setter.
The warning codes that you'd need to suppress are CS0612 for the plain Obsolete attribute and CS0618 if the attribute has a custom message.
[Obsolete("Please don't touch the backing field!")]
private int _backingField;
public int YourProperty
{
#pragma warning disable 612, 618
get { return _backingField; }
set { _backingField = value; }
#pragma warning restore 612, 618
}
There's no inbuilt way to do what you want to do, but by the sounds of things you need another layer of abstraction between your class and that value.
Create a separate class and put the item in there, then your outer class contains the new class, and you can only access it through its properties.
No, there isn't. I'd quite like this myself - something along the lines of:
public string Name
{
private string name; // Only accessible within the property
get { return name; /* Extra processing here */ }
set { name = value; /* Extra processing here */ }
}
I think I first suggested this about 5 years ago on the C# newsgroups... I don't expect to ever see it happen though.
There are various wrinkles to consider around serialization etc, but I still think it would be nice. I'd rather have automatically implemented readonly properties first though...
You CAN do this, by using a closure over a local in the constructor (or other initialisation function). But it requires significantly more work that the helper class approach.
class MyClass {
private Func<Foo> reallyPrivateFieldGetter;
private Action<Foo> reallyPrivateFieldSetter;
private Foo ReallyPrivateBackingFieldProperty {
get { return reallyPrivateFieldGetter(); }
set { reallyPrivateFieldSetter(value); }
}
public MyClass() {
Foo reallyPrivateField = 0;
reallyPrivateFieldGetter = () => { return reallyPrivateField; }
reallyPrivateFieldSetter = v => { reallyPrivateField = v; };
}
}
I suspect that the underlying field type Foo will need to be a reference class, so the two closures are created over the same object.
There is no such provisioning in C#.
However I would name private variables differently (e.g. m_something or just _something) so it is easier to spot it when it is used.
You can put all of your private fields into a nested class and expose them via public properties. Then within your class, you instantiate that nested class and use it. This way those private fields are not accessible as they would have been if they were part of your main class.
public class A
{
class FieldsForA
{
private int number;
public int Number
{
get
{
//TODO: Extra logic.
return number;
}
set
{
//TODO: Extra logic.
number = value;
}
}
}
FieldsForA fields = new FieldsForA();
public int Number
{
get{ return fields.Number;}
set{ fields.Number = value;}
}
}
It just provides a level of obstruction. The underlying problem of accessing private backing fields is still there within the nested class. However, the code within class A can't access those private fields of nested class FieldForA. It has to go through the public properties.
Perhaps a property backing store, similar to the way WPF stores properties?
So, you could have:
Dictionary<string,object> mPropertyBackingStore = new Dictionary<string,object> ();
public PropertyThing MyPropertyThing
{
get { return mPropertyBackingStore["MyPropertyThing"] as PropertyThing; }
set { mPropertyBackingStore["MyPropertyThing"] = value; }
}
You can do all the pre-processing you want now, safe in the knowledge that if anyone did access the variable directly, it would have been really really hard compared to the property accessor.
P.S. You may even be able to use the dependency property infrastructure from WPF...
P.P.S. This is obviously going to incur the cost of casting, but it depends on your needs - if performance is critical, perhaps this isn't the solution for you.
P.P.P.S Don't forget to initialise the backing store! (;
EDIT:
In fact, if you change the value property stored to a property storage object (using the Command pattern for example), you could do your processing in the command object...just a thought.
Can't do this in standard C#, however you could
define a custom attribute say OnlyAccessFromProperty
write your code like
[OnlyAccessFromProperty(Name)]
String name
Name
{
get{return name;}
}
etc …
Then write a custom rule for FxCop (or another checker)
Add FxCop to your build system so if your custom rule find an error the build is failed.
Do we need a set of standard custom rules/attributes to enforce common design patens like this without the need to extend C#
C# has no language feature for this. However, you can rely on naming conventions, similar to languages which have no private properties at all. Prefix your more private variable names with _p_, and you'll be pretty sure that you don't type it accidentally.
I don't know C# but in Java you may have a base class with only private instance variables and public setters and getters (should return a copy of the instance var.) and do all other in an inherited class.
A "general design principle" would be "use inheritance".
There is no build in solution in C#, but I think your problem can be solved by good OO design:
Each class should have a single purpose. So try to extract the logic around your field into a class as small as possible. This reduces the code where you can access the field by accident. If you do such errors by accident, your class is probably to big.
Often interface are good to restrict access to only a certain "subset" of an object. If that's appropriate for your case depends on your setting of course. More details about the work to be done would help to provide a better answer.
You say that you do additional processing. Presumably this would be detectable under the correct conditions. My solution, then, would be to create unit tests that implement conditions such that if the backing field is used directly the test will fail. Using these tests you should be able to ensure that your code correctly uses the property interface as long as the tests pass.
This has the benefit that you don't need to compromise your design. You get the safety of the unit tests to ensure that you don't accidently make breaking changes and you capture the understanding of how the class works so that others who come along later can read your tests as "documentation."
Wrap it in a class? The property thing is a bit like that anyway, associating data with methods - the "Encapsulation" they used to rave about...
class MyInt
{
private int n;
public static implicit operator MyInt(int v) // Set
{
MyInt tmp = new MyInt();
tmp.n = v;
return tmp;
}
public static implicit operator int(MyInt v) // Get
{
return v.n;
}
}
class MyClass
{
private MyInt myint;
public void func()
{
myint = 5;
myint.n = 2; // Can't do this.
myint = myint + 5 * 4; // Works just like an int.
}
}
I'm sure I'm missing something? It seems too normal...
BTW I do like the closures one, superbly mad.
My favorite solution to this (and what I follow) is to name private backing fields that are never intended to be used directly with a leading underscore, and private fields that are intended to be used without the underscore (but still lowercase).
I hate typing the underscore, so if I ever start to access a variable that starts with the underscore, I know somethings wrong - I'm not supposed to be directly accessing that variable. Obviously, this approach still doesn't ultimately stop you from accessing that field, but as you can see from the other answers, any approach that does is a work around and/or hardly practical.
Another benefit of using the underscore notation is that when you use the dropdown box to browse your class, it puts all of your private, never-to-be-used backing fields all in one place at the top of the list, instead of allowing them to be mixed in with their respective properties.
As a design practice, you could use a naming convention for "private properties" that's different from normal public members - for instance, using m_ItemName for private items instead of ItemName for public ones.
If you're using the C# 3.0 compiler you can define properties which have compiler-generated backing fields like this:
public int MyInt { get; set; }
That will mean there is only one way to access the property, sure it doesn't mean you can only access the field but it does mean that there's nothing but the property to access.
I agree with the general rule that the class should trust itself (and by inference anybody coding within the class).
It is a shame that the field is exposed via intellisense.
Sadly placing [EditorBrowsable(EditorBrowsableState.Never)] does not work within that class (or indeed the assembly(1))
In Visual C#, EditorBrowsableAttribute does not suppress members from a class in the same assembly.
If you really do wish to solve this aspect of it the the following class may be useful and makes the intent clear as well.
public sealed class TriggerField<T>
{
private T data;
///<summary>raised *after* the value changes, (old, new)</summary>
public event Action<T,T> OnSet;
public TriggerField() { }
///<summary>the initial value does NOT trigger the onSet</summary>
public TriggerField(T initial) { this.data=initial; }
public TriggerField(Action<T,T> onSet) { this.OnSet += onSet; }
///<summary>the initial value does NOT trigger the onSet</summary>
public TriggerField(Action<T,T> onSet, T initial) : this(onSet)
{
this.data=initial;
}
public T Value
{
get { return this.data;}
set
{
var old = this.data;
this.data = value;
if (this.OnSet != null)
this.OnSet(old, value);
}
}
}
Allowing you to (somewhat verbosely) use it like so:
public class Foo
{
private readonly TriggerField<string> flibble = new TriggerField<string>();
private int versionCount = 0;
public Foo()
{
flibble.OnSet += (old,current) => this.versionCount++;
}
public string Flibble
{
get { return this.flibble.Value; }
set { this.flibble.Value = value; }
}
}
alternatively you can go for a less verbose option but accessing Flibble is by the not idiomatic bar.Flibble.Value = "x"; which would be problematic in reflective scenarios
public class Bar
{
public readonly TriggerField<string> Flibble;
private int versionCount = 0;
public Bar()
{
Flibble = new TriggerField<string>((old,current) => this.versionCount++);
}
}
or solution if you look at the community content!
The new Lazy class in .net 4.0
provides support for several common
patterns of lazy initialization
In my experience this is the most common reason I wish to wrap a field in a private properly, so solves a common case nicely. (If you are not using .Net 4 yet you can just create your own “Lazy” class with the same API as the .Net 4 version.)
See this and this and this for details of using the Lazy class.
Use the "veryprivate" construct type
Example:
veryprivate void YourMethod()
{
// code here
}